[] Insertthestringintotheanchorholeintheupperpartof thespool.Windthestringaroundtheupperpartofthe spoolclockwise,asshownbythearrowsonthespool. Placestringin thesloton upperspoolflange,leaving about6 in. extendedbeyondthe slot. Do notoverfill. Afterwindingthestring,thereshouldbeat least1/4in. betweenthewoundstringandtheoutsideedgeofthe spool.
[] Replacetheplasticretainer,spool,andthespoolretainer. Referto SpoolReplacementearlierinthismanual.
STORINGTHE TRIMMER
[] Remove the battery pack from the string trimmer be- fore storing.
[] Clean all foreign material from the trimmer.
[] Store it in a place that is inaccessible to children.
[] Keep away from corrosive agents such as garden chemicals and
Replacement | Spool | Part | Number | 3110382AG |
Replacement | Spool | Cap | Part Number | 3411546CG |
PROBLEM
String will not advance when using the
Grass wraps around boom
housing and string head
Motor fails to start when switch
trigger is depressed.
POSSIBLE CAUSE
String is welded to itself.
Not enough string on spool.
String is worn too short.
String is tangled on spool.
Cutting tall grass at ground level.
Battery is not secure.
Battery is not charged.
SOLUTION
Lubricate with silicone spray.
Install more string. Refer to String Replace- ment earlier in this manual.
Pull string while pressing button.
Remove string from spool and rewind. Refer to String Replacement earlier in this man- ual.
Cut tall grass from the top down to prevent
wrapping.
To secure the battery pack, make sure the latches on each side of the battery pack snap into place.
Charge the battery pack according to the instructions included with your model.
10 - English
