RULES FOR SAFE OPERATION
•Do not operate a chain saw that is damaged, improperly adjusted, or not completely and securely assembled. Be sure that the saw’s chain stops moving when the trigger is released.
•Use extreme caution when cutting
•When cutting a limb that is under tension, be alert for springback so that you will not be struck when the ten- sion in the wood fibers is released
•Do not cut through nails, rods in the tree, railroad ties or pallets. Inspect a tree that you are going to cut for for- eign objects that could cause injury or damage to your chain saw.
•After striking a foreign object, stop the motor and thor- oughly inspect for damage. Repair as necessary.
•We do not recommend using the chain saw in a tree or on a ladder.
MAINTAIN YOUR SAW IN GOOD
WORKING ORDER
•All chain saw service, other than the items listed in this instruction manual maintenance instructions, should be performed by a Sears or other qualified service dealer.
•Make sure all fasteners are in place and secure.
•Unauthorized replacement parts or the removal of safety devices may cause damage to the unit and possible injury to the operator or bystanders. Use only Craftsman accessories and replacement parts as recommended. Never modify your saw.
•When not in use, saw should be stored in a dry, highly secure location away from children.
•All chain saw service, other that the items listed in this instruction manual maintenance instructions, should be performed by a Sears or other qualified service dealer.
•Use the right tool. Only use this chain saw for its intend- ed purpose, to cut wood.
•Do not overreach. Always keep proper footing and bal- ance.
•Always hold the unit with both hands when operating. Keep a firm grip on all handles or grips.
•Apply chain brake prior to any repositioning of the oper- ator in the cutting area. As an additional safety precau- tion, apply the chain brake prior to setting down the saw.
•Never touch the chain or attempt to service the saw while the motor is running. Make sure all moving parts have stopped. Allow the chain saw to cool, as the chain can be hot.
•Check the bar and chain at frequent intervals for proper adjustment. Make sure the bar and chain are properly tightened and sharpened. Visually inspect for damage. Repair any damage before restarting or operating the chain saw.
WARNING: KICKBACK may occur when the nose
or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a
Do not rely exclusively upon the safety devices built into your saw. As a chain saw user, you should take several steps to keep your cutting jobs free from accident or injury.
KICKBACK SAFETY PRECAUTIONS
•With a basic understanding of kickback, you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents. Be alert to the potential for kickback at all times.
•Keep a good firm grip on the saw with both hands, the right hand on the rear handle and the left hand on the front handle, when the motor is running. Use a firm grip with thumbs and fingers encircling the chain saw han- dles. A firm grip will help you reduce kickback and main- tain control of the saw. Don’t let go.
•Make sure that the area in which you are cutting is free from obstructions. Do not let the nose of the guide bar contact a log, branch, fence, or any other obstruction that could be hit while you are operating the saw.
•Always cut with the motor running at full speed. Fully squeeze the trigger and maintain a steady cutting speed.
•Use only the correct original equipment manufacturer replacement bars, chains and other parts and acces- sories. These are available from a Sears or other quali- fied service dealer. Use of any unauthorized parts or accessories could lead to serious injury to the user, or damage to the unit, and will void your warranty.
•Follow the manufacturer’s sharpening and maintenance instructions for the saw chain.
•Use only the replacement guide bars and low kickback chains specified for your saw to avoid injury.
•Watch for shifting logs or other forces that could pinch or fall into chain.
•Always have saw at full speed when entering a previous cut. Always use caution when entering a previous cut.
•Do not start a cut using the tip of the saw.
4
