OPERATING INSTRUCTIONS
STARTING/STOPPING INSTRUCTIONS
Once the unit is plugged in, stand in the operating position (Fig. 2). Squeeze the trigger to start the unit. To stop the unit, release the trigger (Fig. 5).
To Use the Blower
To use the blower, make sure the shift handle is in the UP position before starting the unit.
1.If the shift handle is in the DOWN position, grasp the red shift latch (Fig. 6) on the shift handle and squeeze until the internal
WARNING: Always wear eye, hearing, foot and body protection to reduce the risk of injury when operating this unit.
Trigger
Fig. 5
OPERATING THE
This unit is equipped with a
locking mechanism releases.
2.Pull the shift handle UP until the red shift latch locks into place.
3.Start the unit following the directions in the Starting/Stopping Instructions (p. 7).
HOLDING THE UNIT
WARNING: Always wear eye, hearing, foot and body protection to reduce the risk of injury when operating this unit.
Before operating the unit, stand in the operating position (Fig. 2). Check for the following:
•The operator is wearing eye protection and proper clothing.
•The right arm is slightly bent, and the hand is holding the shaft grip.
•The left arm is straight, and the hand is holding the
•The unit is at waist level.
•The trimmer/blower attachment is parallel to the ground and is positioned so debris is blown away from operator.
WARNING: To prevent serious injury to yourself or others, or possible damage to property, never point the blower in the direction of people or pets, or in the direction of windows. Always direct the blowing debris away from people, animals, and windows. Use extra caution when blowing debris near solid objects such as trees, automobiles, walls, etc.
OPERATING TIPS WHEN USING TRIMMER/BLOWER ATTACHMENT
•To reduce the risk of hearing loss associated with sound level(s), the use of hearing protection is required.
SELECTING THE TRIMMER OR BLOWER
To switch between the trimmer and blower functions of this unit, make sure that the unit is turned off and the motor has stopped running.
WARNING: To avoid serious personal injury or damage to the unit, DO NOT attempt to shift between the trimmer and the blower while the unit is operating.
To Use the Trimmer
To use the trimmer, make sure the
shift handle is in the DOWN position before starting the unit.
1. If the shift handle is in the UP position, grasp the red shift latch (Fig. 6) on the shift
handle and squeeze until the internal locking mechanism
releases.
2. Push the shift handle DOWN until the red shift latch locks
into place. DO NOT FORCE. If the latch fails to lock
completely into position, rotate the cutting head until the latch
locks into place.
3.Start the unit following the directions in the Starting/Stopping Instructions (p. 7).
•Operate power equipment only at reasonable
•To reduce noise levels, limit the number of pieces of equipment used at any one time.
•To reduce noise levels, operate power blowers at the lowest possible speed to do the job.
•Use rakes and brooms to loosen debris before blowing.
•Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches, and gardens.
•Watch out for children, pets, open windows, or freshly washed cars, and blow debris away.
•After using blowers and other equipment, CLEAN UP! Dispose of debris in trash receptacles.
TIPS FOR BEST TRIMMING RESULTS
•Keep the cutting attachment parallel to the ground.
•Cut from left to right whenever possible. Cutting to the right improves the unit's cutting efficiency. Clippings are thrown away from the operator.
•Trim only when grass and weeds are dry.
•The life of your cutting line is dependent upon:
-Following the trimming tips
-What vegetation is being cut
-Where vegetation is being cut
7