MAINTENANCE AND REPAIR INSTRUCTIONS
WARNING: Never use
WARNING: Always use the correct line length when installing trimming line on the unit.
INSTALLING FIXED LINE
Always use yellow Hassle Free IV™ XTRA QUIET Spiral Line. Lines other than this one may make the motor overheat or fail.
To install the trimming line:
1. Insert each end of the replacement line into the holes on either side of retention hook (Fig. 12).
2. Push the ends through until they stick out of the sides of the head (Fig. 13).
3. Pull the ends through making sure | Fig. 12 |
| |
that the ends are of equal length |
|
and the middle of the line is |
|
centered between the insertion |
|
holes (Fig. 14). |
|
4. If the ends are not of equal length, push the longer end back through the head part way and pull the shorter end to compensate. Repeat until both ends are the same length.
Fig. 13
CLEANING
WARNING: To avoid serious personal injury, always turn your unit off and unplug it before you clean or service it.
Switch off the unit and disconnect it from the power source. Use a small brush to clean off the outside of the unit. Do not use strong detergents. Household cleaners that contain aromatic oils such as pine and lemon, and solvents such as kerosene, can damage plastic housing or handle. Wipe off any moisture with a soft cloth. Also keep the air vents free of obstructions.
INSPECT EXTENSION CORDS
Inspect all extension cords. Look closely for deterioration, cuts or cracks in the insulation. Inspect the connectors for damage. Replace a damaged or defective cord.
STORAGE
•Allow the unit to cool before storing.
•Lock the unit to prevent unauthorized use or damage.
•Store the unit in a dry,
•Store the unit out of the reach of children.
SERVICING DOUBLE INSULATED UNITS
This unit is
Extreme care and knowledge of the system is required when servicing a
Fig. 14
5.Push the trimmer line behind the hook to secure it from coming loose while running
(Fig. 15).
Fig. 15
9