Craftsman 358.79731 instruction manual Fueling Engine

Models: 358.79731

1 13
Download 13 pages 10.17 Kb
Page 7
Image 7
FUELING ENGINE

OPERATING TIPS

While vacuuming or blowing debris, hold the unit with the muffler side fac-

ing away from your body and clothes (see OPERATING POSITION).

To reduce the risk of hearing boss associated with sound level(s), hear- ing protection is required.

To reduce the risk of injury associated with contacting rotating parts, stop the engine before installing or removing attachments. Do not operate without guard(s) in ptace.

Operate power equipment only at rea- sonable hours-not early in the morn- ing or late at night when people might

be disturbed. Compty with times listed in local ordinances. Usual recommen-

dations are 9:00 a.m. to 5:00 p.m., Monday though Saturday.

To reduce noise levets, Iimit the num- ber of pieces of equipment used at any one time.

To reduce noise levets, operate pow- er blowers at the lowest possible throttte speed to do the job.

Use rakes and brooms to toosen debris before Mowing.

In dusty conditions, stightly dampen surfaces or use a mister attachment

when water is available.

Conserve water by using power blow- ers instead of hoses for many lawn and garden applications, including

areas such as gutters_ screens_ patJos_ grills, porches, and gardens.

Watch out for children, pets, open windows, or freshly washed cars. Blow debris away safely.

Use the full blower nozzle extension so the air stream can work close to

the ground.

After using blowers and other equip- ment, CLEAN UPt Dispose of debris in

trash receptacles.

OPERATING POSITION

BlowerVacuum

BEFORE STARTING ENGINE

_WARNING: Be sure to read the

fuel information in the safety ruIes be- fore you begin. If you do not under- stand the safety rules, do not attempt to fuel your unit. Call 1-800-235-5878.

FUELING ENGINE

This engine is certified to operate on unleaded gasoline. Before operation, gasotine must be mixed with a good quality 2-cycle air-coo_ed engine oil. We recommend Craftsman brand oil Mix gasoline and oil at a ratio of 40:1 (A 40:1 ratio is obtained by mixing 3.2 ounces of oil with 1 gallon of unleaded gasoline). DO NOT USE automotive oil or boat oil, These oils will cause engine damage. When mixing fuel, follow instructions printed on container. Once oil is added to gasoline, shake container momentarily to assure that the fuel is thoroughly mixed. Always read and follow the safety rules relating to fuel before fueiing your unit.

IMPORTANT

Experience indicates that alcohol blended fuels (called gasohot or using ethanol or methanol) can attract mois- ture which leads to separation and formation of acids dudng storage. Acidic gas can damage the fuel sys- tem of an engine while in storage.

To avoid engine problems, empty the fuel system before storage for 30 days or longer. Drain the gas tank, start the engine and tet it run until the fuel lines and carburetor are empty. Use fresh fuel next season.

Never use engine or carburetor clean- er products in the fuel tank or perma- nent damage may occur.

Fuel stabilizer is an acceptabIe alter- native in minimizing the formation of fuel gum deposits during storage.

Craftsman brand oil is already btended with fuel stabilizer. See the STORAGE

section for additional information.

STOPPING YOUR ENGINE

To stop the engine, press and hold the ON/STOP switch until engine stops,

-7-

Page 7
Image 7
Craftsman 358.79731 instruction manual Fueling Engine