Craftsman 486.242211 ASSEMBLY OF HOPPER BAG, STEP 9: (SEE FIGURE 10), STEP 10: (SEE FIGURE 11 AND 12), FIGURE, FIGURE, FIGURE, face down

STEP 9: (SEE FIGURE 10)

•Place the star washer (L) between the height adjustment handle and the height adjustment strap. Insert the 5/16" x 1" carriage bolt (F) through the height adjustment handle, the star washer and the height adjustment strap. Assemble a 5/16" flat washer

(K) and the plastic knob (X) onto the end of the bolt.

5/16" x 1"

CARRIAGE BOLT (F)

5/16" FLAT WASHER (K)

PLASTIC KNOB (X)

STAR WASHER (L) (between strap and handle)

FIGURE 10

ASSEMBLY OF HOPPER BAG

STEP 10: (SEE FIGURE 11 AND 12)

•Turn a rear hopper tube so that the brace holes in the middle of the tube face down. Slide the tube through the two loops sewn to the top rear seam inside the hopper bag.

INNER BAG LOOPS

REAR HOPPER TUBE (brace holes on bottom)

FIGURE 11

•Insert the two upper hopper side tubes through the stitched flaps on each side of the hopper bag.

•Assemble the ends of the rear hopper tube onto the ends of the upper hopper side tubes. Fasten together using plastic plugs (Z).

PLASTIC PLUG (Z)

UPPER HOPPER

SIDE TUBE

FIGURE 12

8