STEP 11: (SEE FIGURE 13 AND 14)
•Turn the second rear hopper tube so that the brace holes in the middle of the tube face up. Assemble the ends of the rear hopper tube onto the ends of the lower hopper side tubes. Fasten together using plastic plugs (Z).
REAR HOPPER TUBE (brace holes on top)
PLASTIC PLUG (Z)
LOWER
HOPPER
SIDE TUBE
FIGURE 13
•Place the assembled lower hopper tubes into the bottom of the hopper bag
•Attach the ends of the lower hopper side tubes to the inside of the upper hopper side tubes using two 3/8" x 1/2" clevis pins (O) inserted from the inside, and two 3/32" hair cotter pins (N).
UPPER HOPPER
SIDE TUBE
3/32" HAIR COTTER PIN (N)
LOWER HOPPER
SIDE TUBE
3/8" x 1/2"
CLEVIS PIN (O)
HOPPER BAG
BOTTOM
FIGURE 14
STEP 12: (SEE FIGURE 15 AND 16)
•Insert the bag frame strap into the stitched sleeve along the front edge of the bag bottom.
•Assemble the bag frame strap to the lower hopper side tubes using two 1/4" x
BAG FRAME STRAP
3/32" HAIR COTTER PIN (N)
1/4" x
CLEVIS PIN (P)
FIGURE 15
•Secure the bag corners around the lower hopper side tubes by snapping the bag flaps to the bag bottom on both sides.
FLAPSNAPFIGURE 16
9