Craftsman 486.242211 TOOLS REQUIRED FOR ASSEMBLY, REMOVE PARTS FROM CARTON, STEP 1: (SEE FIGURE 1), STEP 2: (SEE FIGURE 2), ASSEMBLY, FIGURE, middle, FIGURE, IMPORTANT:

TOOLS REQUIRED FOR ASSEMBLY

(2)7/16" Open End or Box End Wrenches

(2)1/2" Open End or Box End Wrenches

ASSEMBLY

IMPORTANT: The overlap bristles at the bottom of each brush help support the back side of the brush for better sweeper performance. Be sure the sweeper is turned as shown in figures 2 and 3 to correctly assemble the brushes.

REMOVE PARTS FROM CARTON

•To protect painted parts, lay them on cardboard or a mat.

•Remove the sweeper housing, the loose parts and the hardware package from the carton. Lay out the parts and hardware as shown on pages 3 and 4.

STEP 1: (SEE FIGURE 1)

•Each brush assembly has one brush retainer marked with either red or black ink. Lay out the brush assemblies as shown so that the brush retainers marked with ink are in the middle with the red one on the right and the black one on the left.

OVERLAP BRISTLES

BRUSH RETAINER

MARKED RED

BRUSH RETAINER

MARKED BLACK

FIGURE 1

STEP 2: (SEE FIGURE 2)

•Attach the brush assembly with the red brush retainer to the right end of the brush shaft using two 1/4" x 1" hex bolts (G) and 1/4" nylock nuts (I). The brush retainer marked with red ink must be placed to the middle of the sweeper.

1/4" NYLOCK NUT (I)

BRUSH RETAINER MARKED RED

1/4" x 1" HEX BOLT(G)

OVERLAP

BRISTLES

BRUSH RETAINER

MARKED RED

FIGURE 2

5