STEP 5: (SEE FIGURE 5)
•Lock the drawbar into position by inserting a 3/8" x 3" hitch pin (20) into the center hole and securing it with a 3/32" cotter pin (19).
20 |
19 |
figure 5
STEP 7: (SEE FIGURE 7)
•Slide the bag frame tube (1) through the front flap in the bottom of the bag.
•Slide the two lower hopper tubes (10) into the flaps at the front of the hopper bag (3) as shown.
3 |
10 |
1 |
figure 7
STEP 6: (SEE FIGURE 6)
•Attach the hitch bracket (12) and straight hitch bracket (13) to the drawbar using two 5/16" x
•Assemble a 3/8" x 3" hitch pin (35) and two 3/4" spacers (22) to the hitch brackets. Secure them in place with a 3/32" hair cotter pin (18).
STEP 8: (SEE FIGURE 8)
•Install a rear hopper tube (11) onto the ends of the lower hopper tubes (10) making sure the holes in the rear hopper tube are facing up.
•Secure the rear hopper tube (11) to the lower hopper tubes (10) with two 1/4" x 1" curved head bolts (26) and 1/4" nylock nuts (24).
|
| NOTE: Hopper bag (3) not shown for clarity. |
| |
|
| 24 |
|
|
|
|
| 11 |
|
|
| 10 | 26 |
|
|
|
|
| |
| 15 |
|
|
|
35 |
|
| 24 |
|
| 12 |
| 10 |
|
22 | 13 |
| 26 | |
|
|
|
| |
| 21 |
|
|
|
18 |
|
|
|
|
| figure 6 |
|
| figure 8 |
6 | Call |
| DO NOT RETURN TO STORE |
