Craftsman 486.24229 manual Tools Required For Assembly

ASSEMBLY

TOOLS REQUIRED FOR ASSEMBLY

(2)7/16" Wrenches

(2)1/2" Wrench

(1)Pliers

(1)Hammer

STEP 1: (SEE FIGURE 1)

•Install a 5/16-18 x 2-3/4" hex bolt (17) and a 5/16" jam nut (25) in each bag arm channel.

254

17

figure 1

STEP 2: (SEE FIGURE 2)

•Slide the bag arm channels (4) into the sweeper housing as shown in figure 2. Secure them to the sweeper housing with a 5/16-18 x 2-1/2" hex bolt (15) and 5/16" nylock nut (21). Tighten bolt until snug. Do not overtighten.

15	4
	21

figure 2

STEP 3: (SEE FIGURE 3)

•Secure each bag arm channel to the side of the sweeper housing with a plastic wing nut (31) installed onto the bolt assembled in step 1.

•Insert a pivot rod retainer (30) down into the end of each bag arm channel.

•Install a compression spring (32) into the bottom of each of the pivot rod retainers to secure them to the bag arm channels.

30

32

31

figure 3

STEP 4: (SEE FIGURE 4)

•Attach the drawbar (14) to the sweeper by fastening a drawbar bracket (8) above and below the drawbar using three 5/16" x 2-1/2" hex bolts (15) and 5/16" nylock nuts (21).

15

8

14

8

21

figure 4

Call 1-866-576-8388 for missing parts or assembly help	5
DO NOT RETURN TO STORE