ii | i | iillll |
ASSEMBLY
CONNECT BATTERY (See Fig. 2)
i ,,,,uJnuJt
nals. Before connecting battery, re-
move metal bracelets, wristwatch CAUTION: Do not short battery termi- bands, rings, etc.
Positive terminal must be connected first to prevent sparking from acciden- tal grounding.
•Lift hood to raised position°
•Open termina! access doors, remove terminal protec- tive caps and discard.
. If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at
•First connect RED battery cable to positive (+) battery terminal with hex bolt, fiat washer, lock washer and hex nut as shown Tighten securely.
•Connect BLACK grounding cable to negative
•Close terminal access doors..
INSTALL SEAT (See Fig. 3)
Adjust seat before tighteningadjustment knob.
•Remove cardboard packing on seat pan
•Place seat on seat pan and assemble shoulder bolt,
•Assemble adjustrnent knob and fiat washer loosely,
Do not tighten.
•Tighten shoulder bolt securelyo
•Lower seat intooperating position and sit on seat°
°Slide seat untila comfortableposition is reached which allows you to press clutch/brake pedal all the way down_
•Get off seat without moving its adjusted position_
•Raise seat and tighten adjustment knob securety_
SEAT
SEAT PAN
SHOULDER
BOLT
Use terminal access doors for:
•Inspection for secure connections (to tighten hard-
ware),
•inspectionfor corrosion_
•Testing battery_
FLAT WASHER
•Jumping (if required).
• Periodic charging. |
|
|
| ADJUSTMENT |
|
|
| KNOB | |
|
| LOCK | FLAT | FIG. 3 |
HEX NUT | WASHER | WASHER |
| |
DISCARDTERMINAL | X |
|
|
|
PROTECTIVE CAPS"\
CHECK TIRE PRESSURE
The tires on your tractor were overinflated at the factory for
shipping purpose& Correct tire pressure is important for best cutting performance..
ACCESS
: | I _.,'_ " | J | CABLE |
NEGATIVE
(BLAC_
CABLE
FIGo2
•Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" on page 3 of this manual.
CHECK BRAKE SYSTEM
After you learn how to operate your tractor, check to see that the brake is properly adjusle& See "TO ADJUST BRAKE" in the Service and Adjustments section of this manual
8
