ASRock Z77 Extreme9 manual Installing Three SLITM-Ready Graphics Cards, Two Goldfingers

Step2. If required, connect the auxiliary power source to the PCI Express graph- ics cards.

Step3. Align and insert the ASRock SLI_Bridge_3S Card to the goldfingers on each graphics card. Make sure the ASRock SLI_Bridge_3S Card is firmly in place.

ASRock SLI_Bridge_3S Card

Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI connector of the graphics card that is inserted to PCIE1 slot.

2.7.1.2 Installing Three SLITM-Ready Graphics Cards

Step 1. Install identical 3-Way SLITM-ready graphics cards that are NVIDIA® certi- fied because different types of graphics cards will not work together prop- erly. (Even the GPU chips version shall be the same.) Each graphics card should have two goldfingers for the 3-Way SLI Bridge connector. Insert one graphics card into PCIE1 slot, another graphics card to PCIE3 slot, and the other graphics card to PCIE5 slot. Make sure that the cards are properly seated on the slots.

English

Two Goldfingers

25

ASRock Z77 Extreme9 Motherboard