EST150
Determining the Installation Height
In order to determine the installation height and throw distance, the mount carriage must be mounted to the projector.
Refer to the projectors User’s Manual to determine the offset of the projector lens to the top of the screen/whiteboard (B).
Mount Carriage
Projector
Lens
1)Measure distance from center of lens to the top of the mount carriage (C).
2)Add the distance from the ground to the top of the screen (A). Add the projector manufacturers recommended offset from the projector manual (B). Add the measurement from Step 1 (C), and then add the mounting screw offset (D) to the total.
(Example: A + B + C + D = ?)
3)Add the measurements to determine the mounting height mark. Place a mark at the top of the total calculated height measurement starting from the ground up. This height mark will determine your mounting points.
Legend
A - Distance from ground to the top of the screen/whiteboard (viewable area).
B - Manufacturers recommended offset measurement. This measurement will be listed in the Users Manual.
C - Center of the lens to the top of the projector bracket.
D - If
This total distance will be the location for the lower mounting point.
Proceed to the “Wood Stud Installation” section.
Mark
Top of Screen
Ground
D
Installation Instructions | Visit the Premier Mounts website at http://www.premiermounts.com | Page 5 |
