EST150
Mount Adjustment
After the projector has been installed, the projector must then be adjusted. To adjust the projector:
1)Loosen the M5 set screw using the M5 Allen wrench (both sides).
2)Adjust the projector to the correct position. Firmly grasp the projector in both hands, and tilt either forward or backward to adjust the level.
1)Firmly grasp the projector in both hands and rotate side to side for orientation adjustment.
2)Tighten both M5 set screws using the M5 Allen wrench.
M5 Set Screw
Technical Specifications
All measurements are in inches(mm).
3.25 | 8.59 |
83 | 218 |
49.42 
1255 
1.81
46 
6.37 |
162 |
2.00 |
51 |
Ø1 3.79 
350
Installation Instructions | Visit the Premier Mounts website at http://www.premiermounts.com | Page 15 |
