EST150
Attaching the Mount Carriage to the Projector Arm
Step 1
Insert and slide the mount carriage along the projector arm to the desired position.
Shown with optional EST-WP dual stud plate
Projector not shown
Step 2
Once you have the desired position, use
one (1) M5 x 10mm security screw to tighten the mount carriage in place.
M5 x 10mm
Security Screw
Proceed to the “Cable Routing (Optional)” section on page 16.
Installation Instructions | Visit the Premier Mounts website at http://www.premiermounts.com | Page 13 |