EST150
Wood Stud Installation
Do NOT
THE EXACT CENTER OF THE STUD MUST BE LOCATED FOR CORRECT AND SAFE INSTALLATION.
EST150 Installation
Step 1
Use an electronic stud finder (not supplied) to locate the center of the stud that is in the wall.
Wood Stud |
Stud finder |
Step 2
Use a pencil to mark the first mounting point, just above your height mark (from page 5).
Mounting Point
Mark
Height
Mark
(from page 5)
Step 3
1)Use the level to make sure the projector arm is level from side to side.
2)Place the projector arm’s second mounting hole over the first mounting point mark, then use a pencil to mark the upper mounting point.
Two (2) mounting points must be used.
Marking
Projector
Arm
Wood Stud
Page 6 | Visit the Premier Mounts website at http://www.premiermounts.com | Installation Instructions |
