ASSEMBLY
CARTON CONTENTS (Loose Parts in Carton) |
|
| |||
1. | Poly Tray | 6. | Latch Stand Bracket | 11. Wheel Support |
|
2. | Handle Tube | 7. | Hitch Bracket | 12. Axle |
|
3. | Front Tongue | 8. | Leg Stand Bracket | 13. Wheels (2) |
|
4. | Rear Tongue | 9. | Latch Lock | 14. Handle Grip |
|
5. | Latch Stand Plate | 10. Latch Mount Brackets (2) |
|
| |
|
|
| 1 |
|
|
|
|
|
| 14 | 11 |
|
|
|
|
| |
|
|
| 2 |
|
|
|
|
| 5 |
| 12 |
|
|
|
|
| |
|
|
| 6 |
| 13 |
|
| 3 |
|
|
|
|
| 9 | |
4 |
| 8 | |
7 | 10 | ||
| |||
|
|
CARTON CONTENTS
TOOLS REQUIRED FOR ASSEMBLY
(1)Screwdriver
(1)Pliers
(2)7/16" Wrenches
(2)1/2" Wrenches
(2)9/16" Wrenches
•Remove the hardware pack and all loose parts from the carton. Be sure the carton is empty before discarding.
•Insert the 3/8" x 1" clevis pin (H) through the holes in the latch mount brackets and secure with an 1/8" hairpin cotter (M).
LATCH MOUNT |
|
BRACKETS | (J) 1/4" NYLOCK NUT |
|
(E) 1/4" x 1"
HEX BOLT(N) EXTENSION SPRING
•Lay out all the parts shown on pages 3 and 4.
NOTE: All 1/4" fl at washers should be assembled so that they rest directly against the poly tray surface.
STEP 1: (SEE FIGURE )
•Assemble the latch lock between the latch mount brackets using a 1/4" x 1" hex bolt (E) and a 1/4" nylock nut (J). Tighten so that the latch lock can still pivot. Attach the extension spring (N) to the latch lock and the latch mount bracket.
(M) 1/8" HAIRPIN COTTER
(H) 3/8" x 1" | LATCH LOCK | |
CLEVIS PIN | ||
|
FIGURE 1
4