STEP 9: (SEE FIGURE 9)

•Align the holes in the handle with the holes in the bottom of the poly tray, the latch stand plate and the latch stand bracket. Fasten together using four 1/4" x 1-3/4" hex bolts (D), 1/4" fl at washers (I) and 1/4" nylock nuts (J). Tighten.

•At this time tighten all bolts which were left loose.

(D) 1/4" x 1-3/4"

(I) 1/4" FLATHEX BOLT WASHER

STEP 10: (SEE FIGURE )

•Assemble the hitch pin (Q) through the tongue and hitch bracket and secure it with the 1/8" hairpin cotter

(M).

(Q)HITCH PIN

HITCH

BRACKET

(M) 1/8" HAIRPIN COTTER
(J) 1/4"

NYLOCK NUT

FIGURE 9

CART WITH TONGUE ARRANGED FOR TOWING

LATCH LOCK

FRONT

TONGUE

(H) 3/8" x 1"

CLEVIS PIN

(G) 3/8" x 4"

CLEVIS PIN

FIGURE 10

FIGURE 11

STEP 11: (SEE FIGURE 12)

•Attach two noise reduction pads (R) on each side of the front tongue.

PADS (R)

PADS (R)

FIGURE 12

7