Craftsman 486.24414 manual Tire Chauns, Weight Bracket, Snow Cab, For Draw Bar

REMOVING DOZER BLADE FROM TRACTOR

1_ Lower blade to ground with blade in the center (straight ahead) position.

,Refer to figure 37 below:

A, Remove cotter pins and lift links from side plates, B, Remove attachment rod from blade frame

assembly,

C, Pull blade frame assembly from side plates,

NOTE: Frame brackets do not require removal unless a different attachment is mounted to front of tractor,

ATTACHMENT

COTTER ,

\\

\

UFT LmNK

CLEVmS

PIN

FIGURE 37

RECOMMENDATIONS WHEN STORING

When the dozer is not being used, remove all dirt and rust and touch up with paint.

Apply a light coat of grease or rust prevention to the blade and oil pivot points.

,Store in an area where it is protected from weather.

,Store in a dry area, protected from weather.

These and other accessories are recommended for use with your unit, Call 1-800-4-MyoHOME®to find out if they are available, if available, they may be purchased at most Craftsman outlets or by calling I°800°4-MyoHOME®,

TIRE CHAUNS	WEIGHT BRACKET	SNOW CAB
	FOR DRAW BAR

17