Wheelweightsandtire chainsmustbeusedwith yoursnowbladefor traction.These accessories are
available at your nearest Sears retail store.
Using the Snow blade
,Prepare the lawn tractor engine for cold weather using instructions furnished with the lawn tractor,
Always begin with the transmission in first (low) gear and gradually increase speed as required,
Do not repeatedly push snow in the same direction, This causes excessive build up with each successive pass,
To reduce icing on the blade, allow the lawn tractor and blade to adjust to outdoor temperature before operating,
For improved snow removal performance, coat the blade with automotive type paste wax,
CUSTOMER RESPONSiBiLiTiES
Read and follow the maintenance schedule and the procedures listed in the maintenance section,
MAINTENANCE | SCHEDULE |
|
Fill in dates as you |
| |
complete regular | service. |
|
Check for loose fasteners |
| |
Check for worn or damaged parts |
| |
Clean Blade | x | x |
Lubricate BIade |
| x |
CHECK FOR LOOSE FASTENERS
During the operating season, check all bolts, nuts and hairpin cotters to be sure they are secure,
CHECK FOR WORN OR DAMAGED PARTS
,During the operating season, check for worn and damaged parts, Replace or repair any that have excessive damage or wear,
CLEAN BLADE
,,During the operating season, clean the blade off after each use, Touch up any bare metal with paint or apply a light coat of grease or rust preventive,
LUBRICATE BLADE
,Lubricate al! pivot points to help maintain proper operation of blade, Use grease packet furnished with the snow blade for lubrication of the upper portion of the lift handle rod,
CAUTION: Carefully inspect the area to be worked before operating the snow blade, Avoid pipes, roots, curbs or other heavy obstructions,
CAUTION: Know the terrain, Avoid exceptionally steep slopes or
CAUTION: Always lower the blade to the ground before leaving the tractor,
Service Dates
GREASE
LUBRICATE
FIGURE 25
12
