INSTALLING HANGER BRACKETS
For better clearance, lower the tractor's suspension arms using the attachment lift lever
STEP 26: (SEE FIGURE 25 or28)
On Tractors With Foot Rest Brackets
•Remove the bolt and nut that fasten the L.H. and R.H. foot rest brackets to the frame
•Attach the L.H Hanger Bracket (marked "L") to the inside of the tractor frame using two 3/8" x 1" carriage bolts (K) and 3/8" flanged nuts (BB) Bolt heads go on inside of tractor frame Repeat for the R.H. side.
HOLT REMOVED | i |
',,FROM THIS HOLE | / |
_// | 3/8" FLANGED |
- | NUT (HB) |
| SUSPENSION ARM | |
3/8" x 1" | LH. HANGER \\. | /' |
CARRIAGE | BRACKET |
|
BOLT (K) |
|
|
FIGURE 25 |
| LEFT SIDE ViEW |
On Tractors Without Foot Rest Brackets
•Find the empty hole beneath the foot rest Attach the L.H Hanger Bracket (marked "L") to the inside of the frame using a 3/8" x 1" carriage bolt (K) and a 3/8" flanged nut (BB) Bolt head goes on inside of tractor frame. Repeat for the RH side
3/8" FLANGED
NUT (HH!
/
/
/ | SUSPENSION ARM | |||
| ||||
3/8" x 1" f | L.H.H.&NGER | "\, | / | |
CARRIAGE | ||||
BRACKET |
|
| ||
BOLT (K) |
|
| ||
|
|
| ||
FIGURE 28 |
| LEFT | SIDE VIEW | |
iNSTALLING SHOULDER BOLTS
STEP 27: (SEE FIGURE 27)
•Remove the bolt, washer and nut which fasten the sway bar bracket to the LH side of the tractor frame. Replace with a shoulder bolt (P) and a 3/8" flanged nut (BB). Bolt goes on inside of frame.
BOLT REMOVED |
| |
FROM THIS HOLE | 3/8" | |
k |
| FLANGED |
\\ | SWAY BAR | /NHT(BB) |
| _. BRACKET | / |
FIGURE 27 |
| LEFT SIDE VIEW |
STEP 28: (SEE FIGURE 28)
•Assemble a shoulder bolt (P) and 3/8" flanged nut
(BB)to the RH side of the tractor frame, using the first empty hole to the rear of the R.H. hanger bracket. Bolt goes on inside of frame.
SHOULDER BOLT (P)
R.B. HANGER BRACKET
FIGURE 28 | RIGHT SIDE VIEW |
14
