Z_ WARNING: Never store your

Edger indoors or in an enclosed, poorly ventilated area. If gasoline remains in the tank, fumes may reach an open flame, spark or pilot light from a furnace, water heater, clothes dryer, cigarette, etc.

EDGER

•Clean the Edger thoroughly; remove all debris and wipe the unit dry.

•Inspect the Edger for worn or damaged parts and tighten all loose hardware.

•Oil all points described in the Lubrication

paragraph in the MAINTENANCE section of this manual.

•Store the Edger in a protected area and cover for additional protection.

IMPORTANT:A yearly checkup or tune- up by a Craftsman Service Center is a

good way of ensuring that your Edger will provide maximum performance for the next season.

ENGINE

IMPORTANT: It is important to prevent

gum deposits from forming in essential

fuel system parts such as the carburetor, fuel filter, fuel hose, or tank during storage.

Also, experience indicates that using alcohol-blended fuels (called gasohol, ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

To prevent engine damage (if Edger is not used for more than 30 days) follow the steps below.

•To remove gasoline, run the engine until the tank is empty and the engine stops.

•If you do not want to remove gasoline, a fuel stabilizer (such as Craftsman fuel stabilizer No. 33500) may be added to any gasoline left in the tank to minimize

gum deposits and acids. If the tank is almost empty, mix stabilizer with fresh

gasoline in a separate container and add

some to the tank. Always follow instruc- tions on stabilizer container, Then run

engine at least 10 minutes after stabilizer is added to allow mixture to reach

carburetor. Store Edger in a safe place. See waming on this page.

•Store the Edger in the wheels-down, operating position. If the Edger is stored in any other position, oil from the crankcase could enter the cylinder, causing a service problem.

You can keep your engine in good operat- ing condition during storage by:

•Changing oil.

•Lubricating the piston/cylinder area. This can be done by first removing the spark plug and squirting clean engine oil into the spark plug hole. Then cover the spark plug hole with a rag to absorb oil spray. Next, rotate the engine by pulling the starter two or three times. Finally, reinstall spark plug and attach spark plug wire.

14

Page 13 Page 15
Page 14
Image 14
Craftsman 536.7722 manual Edger, Engine
Page 13 Page 15

536.7722 specifications

The Craftsman 536.7722 is a versatile and robust snow blower that has become a favorite among homeowners for its efficiency and reliability in clearing snow during harsh winter months. This model is designed to handle various snow conditions, making it an ideal choice for those living in areas with heavy snowfall.

One of the standout features of the Craftsman 536.7722 is its powerful engine. It is equipped with a reliable 5.5 horsepower engine that provides ample power to tackle even the toughest snow accumulation. The engine is designed for easy start-up, ensuring that users can get to work quickly without the fuss of traditional pull-start mechanisms.

The snow blower features a 22-inch clearing width, allowing it to efficiently clear paths, driveways, and sidewalks in a single pass. This larger width reduces the time and effort needed to clear snow, making it an efficient choice for both small and medium-sized areas. The adjustable chute is another highlight of the Craftsman 536.7722. It allows users to control the direction and distance the snow is thrown, with a rotation capability of up to 190 degrees. This feature enables precise snow removal and prevents the need for repeated passes over the same areas.

The Craftsman 536.7722 is also equipped with an innovative auger system, which enhances its snow-clearing capabilities. The heavy-duty auger is designed to break down and scoop up snow with ease, ensuring that even packed snow can be cleared effectively. The snow blower operates with a two-stage system, which means the auger collects the snow and sends it to an impeller that throws it out of the chute, allowing for efficient snow dispersal.

In addition to its performance features, the Craftsman 536.7722 is built with comfort in mind. The ergonomic handles are designed for ease of use, and they can be adjusted to suit different user heights. The snow blower’s compact design allows for easy maneuverability in tight spaces, making it ideal for residential use.

Overall, the Craftsman 536.7722 combines power, efficiency, and user-friendly features, making it a reliable tool for anyone looking to keep their property clear of snow throughout the winter season. With its robust construction and advanced technology, this snow blower stands out as a top contender in the market for homeowners seeking effective snow removal solutions.
Top Page Image Contents