Traction Drive

Belt

Auger Drive

 

 

Belt

 

 

Guide

Idler Pulley

 

Drive

 

Pulley

Loosen this nut

Figure 23

3.Loosen the nut on the idler pulley and move the pulley toward the belt about 1/8". See Figure 23.

4.Tighten the nut.

5.Press the auger drive lever. Check the _ension on the belt (opposite au-

ger idler pulley). The belt should deflect about 1/2" with moderate

pressure (See Figure 24).

 

_. _k"-_"-D

rive

 

 

"__o 0

Pulley

Auger idler

_

" ;_-

t ;.:

Pulley

a

".

1/2 Inch

" _

Engaged ._.__D;_;

flectlon

Figure 24

NOTE: If the adjustment is not correct, repeat the adjustment.

6.Replace the belt cover.

7.Check the clutch control cable ad- justment.

8.Reconnect the spark plug wire.

Traction Drive Belt

The traction drive belt has constant spring pressure and does not require adjustment. Replace the traction drive belt if it is slipping. See To Replace Belts paragraph in this section.

TO REPLACE BELTS

The drive belts on this snow thrower are of special construction and should be replaced with original equipment belts available from your nearest Craftsman Store. A distributor's list is supplied in the parts manual.

You will need the assistance of a sec- ond person while replacing the belts.

How To Remove The Auger Drive Belt

If the auger drive belt is damaged, the

snow thrower will not discharge snow. Replace the damaged belt as follows.

1.Remove the gas from the gas tank.

Stand the snow thrower up on the front end of the auger housing.

outdoors, away from fire or

,_ WARNING: Drain the gasoline flame.

2.Disconnect the spark plug wire.

3.Remove the screw from the belt cover. Remove the belt cover. See Figure 22.

4.Remove the bolts on each side of the motor mount frame. See

Figure 25.

5.Loosen the bolts on each side of the motor mount frame. The au- ger housing and the motor mount

frame will separate, hinged by the bolts.

Panel

Bottom

Mount ...._-K_

1_/'Auger

Housing

Frame" _

Remove top bolt (each L

side)/ %

Loosen bottom

(Each Side)

Figure 25

6.Loosen the belt guide. Pull the belt guide away from the auger drive pulley. See Figure 23.

7.Loosen the nut on the idler pulley. Pull the idler pulley away from the auger drive belt.

F-001087J22

Page 22
Image 22
Craftsman 536.88644 manual To Replace Belts, Traction Drive Belt, How To Remove The Auger Drive Belt, Side/ %

536.88644 specifications

The Craftsman 536.88644 is a versatile snow blower designed to tackle the challenges of winter weather with efficiency and ease. As part of the Craftsman lineup, this machine exemplifies the brand's commitment to quality, performance, and user satisfaction.

One of the standout features of the Craftsman 536.88644 is its powerful engine. Equipped with a reliable 24-inch clearing width, the snow blower can efficiently handle heavy snowfall, making it an ideal choice for homeowners in areas that experience significant winter weather. The engine delivers robust performance, allowing the machine to handle not only light dustings but also deeper snow accumulations.

The Craftsman 536.88644 features a self-propelling system, which ensures that users can effortlessly maneuver the machine across various terrains. The adjustable speed settings offer flexibility, enabling users to customize their pace based on the snow conditions and their own preferences. This feature is particularly beneficial during heavy snowfall, where control and direction become crucial.

An additional innovative technology integrated into the design is the 180-degree chute rotation. This allows users to easily direct snow away from walkways, driveways, and parked vehicles, providing optimal snow management. The chute can be adjusted with a simple crank, making it user-friendly and efficient for rapid snow clearing tasks.

Durability is a key characteristic of the Craftsman 536.88644. Built with robust materials, it is engineered to withstand the rigors of winter use. The reinforced auger and impeller design not only enhances durability but also increases the machine's snow-throwing capability, allowing it to throw snow up to 40 feet away.

User comfort is also a consideration in the design of this snow blower. The ergonomically designed controls and comfortable grip handles reduce fatigue during operation, while the heated hand grips provide warmth during cold winter days. This thoughtful design ensures that users can operate the Craftsman 536.88644 for extended periods without discomfort.

Overall, the Craftsman 536.88644 combines power, versatility, and user-friendly features to create a reliable snow-clearing solution. With its robust performance, thoughtful design, and durable construction, this snow blower is well-suited for homeowners seeking to maintain clear pathways and driveways during the winter months. Whether faced with light snowfall or heavy blizzards, the Craftsman 536.88644 ensures efficient and effective snow removal.