Craftsman 536.88644 manual Know Your Snow Thrower, Choke Control Used to start a cold

KNOW YOUR SNOW THROWER

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR SNOW THROWER. Compare the illustrations with your SNOW THROWER to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

	Auger__		--	Traction Drive Lever
Electric				(left hand)
	Drive	Lever
Start	(right	hand)		, Remote
Button
				Chute Control
Primer
				Lever
nition Bu	Switch

Box	Assembly
	Deflector
	Discharge
	Chute

Choke
Control	Recoil	Height
Throttle	Starter	Adjust
Control	Handle	Skid	Figure 10

Auger Drive Lever - Starts and stops the auger and impeller (snow gathering

and throwing)

Traction Drive Lever - Propels the snow thrower forward and in reverse.

Speed Shifter Lever - Selects the speed of the snow thrower (6 speeds for-

ward and 2 speeds reverse).

Crank Assembly - Changes the direction of snowthrowingthroughthe dischargechute.

Chute Deflector - Changes the distance the snow is thrown.

Discharge Chute - Changes the height

and direction the snow is thrown.

Choke Control - Used to start a cold

engine.

Primer Button - Injects fuel directly into the carburetor manifold for fast starts in cold weather.

Remote Chute Control Lever - Push forward to discharge snow high and far.

Pull remote lever back to discharge snow down.

Throttle Control - Controls the engine speed.

Electric Start Button - (if so equipped)

Used to start the engine using the 120 V elec- tric starter.

Height Adjust Skid - Adjusts the ground clearance of the auger housing.

Ignition Key - Must be inserted to start the engine.

Recoil Starter Handle - Starts the en-

gine manually.

Shear Pin -Shear pins are designed to break (to protect the machine) if an ob-

iect becomes lodged in the aguer hous- ing.

Toolbox --spare shear pins and spacers are located in toolbox.

F--001087J11