ENGINE TECHNICAL iNFORMATiON
This is a single cylinder, Uhead, air cooled engine, it is a low emissions engine.
in the State of California, Model Series
100000 engines are certified by the California Air Resources Board to meet emissions standards for
125 hours. Such certification does not grant the purchaser, owner or operator of this engine any additional warranties with respect to the performance or operational life of this engine. The engine is warranted solely according to the product and emissions warranties stated elsewhere in this manual.
Power Ratings
The power ratings for an individual engine model are initially developed by starting with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) (Revision 2002- 05). Given both the wide array of products on which our engines are placed, and the variety of environmental issues applicable to operating the equipment, it may be that the engine you have purchased will not develop the rated horsepower when used in a piece of power equipment (actual
PRODUCT SPECiFiCATiONS
Pressure | Washer | Specifications |
Pressure | .................. | 2150 PSI |
Flow Rate | ................. | 1.9 GPM |
Chemical | Mix | Use as directed |
Water Supply Temperature .... Not to exceed 100°F
Shipping Weight ............ 57 Ibs.
Engine | Specifications |
|
Rated Horsepower | 4.0 at 3600 rpm | |
Bore | 2.562 in. (65.09 mm) | |
Stroke | 1.875 in. (47.63 mm) | |
Displacement | 9.67 in. (158.6 cc) | |
Spark Plug |
| |
Type: | Champion | |
|
| Equivalent |
Set Gap To: | 0.030inch (0.76mm) | |
Armature | Air Gap: | |
|
|
Valve clearance with valve springs installedand piston 1/4 in. (6 mm) past top dead center (check when engine is cold).
intake | |
| |
Exhaust | |
| |
Fuel Capacity | 1,0 Quarts |
Oil Type: |
|
Above 40° F | SAE 30 |
Below 40° F | SAE |
NOTE: For practical operation, the horsepower loading should not exceed 85% of rated horsepower. Engine power will decrease
1,000 feet (300 meters) above sea level and 1% for each 10° F (5.6 ° C) above 77° F (25 ° C). It will operate satisfactorily at an angle up to 15°.
12