Yourpressurewasherrequiressomeassemblyandis readyfor useonlyafterit hasbeenproperlyserviced withtherecommendedoil andfuel.

Ifyou haveany problemswith theassemblyof

your pressurewasher,pleasecall thepressure washerhelplineat 1-800-222-3136.

IMPORTANT:Anyattemptto runtheenginebeforeit hasbeenservicedwiththerecommendedoilwillresult

in an engine failure.

NOTE: When adding oil to the engine crankcase, use only high quality detergent oil rated with API service classification SF, SG, SH, SJ or higher. DO NOT use special additives.

1.Choose a viscosity according to the following table.

REMOVE PRESSURE WASHER FROM CARTON

•Open carton and slice two corners from top to bottom so the panel can be folded down flat.

•Remove fillers, accessories and parts bag shipped with your pressure washer.

•Remove the pressure washer out the open end of the carton.

•Check carton for additional loose parts.

CARTON CONTENTS

Check all contents. If any parts are missing or damaged, call the pressure washer helpline at 1-800-222-3136.

•The main unit

•High pressure hose

•Spray gun

•Nozzle extension with quick connect fitting and nozzle holder

•Safety goggles

•Engine oil

•Parts bag (which includes items listed below) Owner's manual

Registration card

Bag containing 4 multi=colored spray tips

Become familiar with each piece before assembling the pressure washer. Compare contents against the view on page 5. If any parts are missing or damaged, call the pressure washer helpline at 1-800-222-3136.

ASSEMBLING YOUR PRESSURE WASHER

Your Craftsman pressure washer was mostly assembled at the factory. However, you will need to perform these tasks before you can operate your pressure washer:

1.Add oil to engine crankcase.

2.Add fuel to fuel tank.

3.Connect high pressure hose to spray gun and pump.

4.Connect water supply to pump.

5.Select/attach quick connect spray tip to nozzle extension.

Add Engine Oil

IMPORTANT: Any attempt to crank or start the engine before it has been properly serviced with the recommended oil may result in an engine failure.

STARTING TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

*The use of multi-viscosity oils (5W-30, 10W-30, etc.) in temperatures above 40°F (4°C) will result in higher than normal oil consumption. When using a multi- viscosity oil, check oil more frequently.

**If using SAE 30 oil in temperatures below 40°F (4°C), it will result in hard starting and possible engine bore damage due to inadequate lubrication.

2.Place pressure washer on a level surface and clean area around oil fill.

3.Remove dipstick and wipe clean with cloth.

4.Replace and tighten dipstick.Remove and check oil level.

5.Slowly pour oil into oil fill opening. Pause to permit oil to settle. Fill to "Full" mark on dipstick. DO NOT OVERFILL. Remove dipstick and check oil level.

NOTE: You may not need to use all the supplied oil.

6.Replace dipstick and tighten securely. NOTE: Check oil often during engine break=in.

Add Fuel

WARNING

WHEN ADDING FUEL

Turn pressure washer OFF and let it cool at least 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank.

Fil! or drain fuel tank outdoors.

DO NOT overfill tank. Allow space for fuel expansion.

Keep fue! away from sparks, open flames, pilot lights, heat, and other ignition sources.

DO NOT light a cigarette or smoke.

Page 5 Page 7
Page 6
Image 6
Craftsman 580.75201 owner manual Remove Pressure Washer from Carton, Carton Contents, Assembling Your Pressure Washer
Page 5 Page 7

580.75201 specifications

The Craftsman 580.75201 is a versatile and powerful leaf blower designed to make yard work more efficient and effective. With its robust performance and user-friendly features, this model appeals to both homeowners and professional landscapers.

One of the standout characteristics of the Craftsman 580.75201 is its powerful engine. Equipped with a 27cc 2-cycle gas engine, this leaf blower offers excellent airflow and velocity, allowing you to tackle even the heaviest leaf piles and debris with ease. The impressive airspeed, reaching up to 200 miles per hour, ensures that leaves and debris are not just disturbed but blown away quickly and efficiently.

The design of the Craftsman 580.75201 emphasizes user comfort and control. It features an ergonomic handle, which reduces fatigue during prolonged use. The machine also includes a throttle control, giving users the ability to adjust speeds according to their specific needs. This adaptability makes it perfect for various tasks, from clearing grass clippings to moving heavier leaves.

In terms of technology, the Craftsman 580.75201 incorporates advanced start features that reduce starting effort. The easy-start system ensures a hassle-free ignition process, allowing users to get to work without the frustration of a stubborn engine. Additionally, its lightweight construction helps enhance maneuverability while reducing strain during operation.

Maintenance is simplified with this leaf blower, thanks to its accessible design. Easy access to the air filter and spark plug allows users to perform routine checks and replacements, extending the lifespan of the machine and ensuring optimal performance. Additionally, its fuel-efficient engine helps users save on fuel costs while minimizing environmental impact.

Noise reduction technology is another notable feature. The Craftsman 580.75201 operates at a lower decibel level compared to many traditional gas leaf blowers, allowing users to work without causing significant disturbance to neighbors or local wildlife.

Overall, the Craftsman 580.75201 stands out as a reliable and efficient leaf blower. Its powerful engine, user-friendly design, and innovative features make it an excellent tool for seasonal yard maintenance, ensuring that cleaning up leaves and debris can be done quickly and effectively. Whether for residential tasks or professional landscaping duties, this leaf blower proves to be a valuable addition to any outdoor toolkit.
Top Page Image Contents