Connect Hose and Water Supply to Pump

NOTE: This engine is certified to operate on gasoline.

Exhaust Emission Control System: EM (Engine Modifications).

1.Use clean, fresh, regular UNLEADED fuel with a

minimum of 77 octane with equipment. DO NOT use fuel which contains Methanol. DO NOT mix oil

with fuel.

2.Clean area around fuel fill cap, remove cap.

3.Slowly add regular unleaded fuel to fuel tank. Be careful not to overfill. Allow about 1.5" of tank space for fuel expansion, as shown here.

4.install fuel cap and wipe up any spilled fuel.

CAUTRON! Alcohol-blended fuels (called gasohol, ethanol or methanol) can attract moisture, which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the fuel tank, start the engine and let it run untiJthe fuel lines and carburetor are empty. Use fresh fuel next season. See "Storage" on pages 17-18 for additional information.

NEVER use engine or carburetor cleaner products in the fuel tank as permanent damage may occur.

IMPORTANT: To avoid pump damage, you must assemble the nozzle extension to the spray gun and attach all hoses before you start the engine.

1.Uncoil high pressure hose and attach one end of hose to base of spray gun. Tighten by hand.

2.Attach other end of high pressure hose to high pressure outlet on pump. Tighten by hand.

Before connecting garden hose to water inlet, inspect inlet screen. Clean screen if it contains debris or have it replaced if damaged. Refer to section "O-Ring Maintenance" if inlet screen is

damaged. DO NOT run pressure washer if inlet

screen	is damaged.
	-_,.	screen. DO
		NOT use if
"_	__	damaged;
"_	__	Inspect inlet
		clean if dirty.

4.Run water through garden hose for 30 seconds to flush it of debris. Turn off water.

IMPORTANT: DO NOT siphon standing water for the water supply. Use ONLY cold water (less than 100°F).

5.Connect garden hose (not to exceed 50 feet in length) to water inlet. Tighten by hand.

CAUTION

*Damage to equipment resulting from failure to follow this instruction will void warranty,

6.Turn ON water and squeeze trigger on spray gun to purge pump system of air and impurities.

WARNING

Always wear eye protection when using this equipment or in vicinity of where equipment is in use.

Before starting the pressure washer, be sure you are wearing adequate eye protection,

Checklist Before Starting Engine

Review the unit to ensure you have performed all of the following:

1.Check that oil has been added to proper level in engine crankcase.

2.Add proper gasoline to fuel tank.

3.Check for properly tightened hose connections (high pressure and water supply) and that there

are no kinks, cuts, or damage to high pressure hose.

4.Provide proper water supply (not to exceed 100 °F).

5.Be sure to read "Safety Rules" and "Operation" sections before using the pressure washer.

6.If starting unit after storage, see "Storage" section on pages 17-18.

580.75201 specifications

The Craftsman 580.75201 is a versatile and powerful leaf blower designed to make yard work more efficient and effective. With its robust performance and user-friendly features, this model appeals to both homeowners and professional landscapers.

One of the standout characteristics of the Craftsman 580.75201 is its powerful engine. Equipped with a 27cc 2-cycle gas engine, this leaf blower offers excellent airflow and velocity, allowing you to tackle even the heaviest leaf piles and debris with ease. The impressive airspeed, reaching up to 200 miles per hour, ensures that leaves and debris are not just disturbed but blown away quickly and efficiently.

The design of the Craftsman 580.75201 emphasizes user comfort and control. It features an ergonomic handle, which reduces fatigue during prolonged use. The machine also includes a throttle control, giving users the ability to adjust speeds according to their specific needs. This adaptability makes it perfect for various tasks, from clearing grass clippings to moving heavier leaves.

In terms of technology, the Craftsman 580.75201 incorporates advanced start features that reduce starting effort. The easy-start system ensures a hassle-free ignition process, allowing users to get to work without the frustration of a stubborn engine. Additionally, its lightweight construction helps enhance maneuverability while reducing strain during operation.

Maintenance is simplified with this leaf blower, thanks to its accessible design. Easy access to the air filter and spark plug allows users to perform routine checks and replacements, extending the lifespan of the machine and ensuring optimal performance. Additionally, its fuel-efficient engine helps users save on fuel costs while minimizing environmental impact.

Noise reduction technology is another notable feature. The Craftsman 580.75201 operates at a lower decibel level compared to many traditional gas leaf blowers, allowing users to work without causing significant disturbance to neighbors or local wildlife.

Overall, the Craftsman 580.75201 stands out as a reliable and efficient leaf blower. Its powerful engine, user-friendly design, and innovative features make it an excellent tool for seasonal yard maintenance, ensuring that cleaning up leaves and debris can be done quickly and effectively. Whether for residential tasks or professional landscaping duties, this leaf blower proves to be a valuable addition to any outdoor toolkit.

Craftsman 580.75201 Connect Hose and Water Supply to Pump, Checklist Before Starting Engine

Models: 580.75201