Warn NG

6.Installoilfill pluganddipstick,tightensecurely.

7.Wipeupanyremainingoil.

8.Reconnectsparkplugwiretosparkplug.

Service Air Cleaner

Your engine will not run properly and may be damaged if you run it with a dirty air cleaner.

Service the air cleaner once every 25 hours of operation or once each year, whichever comes first. Service more often if operating under dirty or dusty conditions. Replacements are available at your local Sears service center.

To service the air cgeaner, follow these steps:

1.Loosen screw and tilt cover down.

Tabs and Slots

Cartridge

Base

Screw Cover

2.Carefully remove cartridge assembly.

3.To clean cartridge, gently tap pleated paper side on a fiat surface.

4.Reinstall clean or new cartridge assembly inside cover.

5.insert cover's tabs into slots in bottom of base.

6.Tilt cover up and tighten screw securely to base.

NOTE: You can purchase new air filter elements by calling 1-800-366-PART.

Service Spark Pmug

Service the spark plug every 100 hours of operation or yearly, whichever occurs first.

1.Clean area around spark plug.

2.Remove and inspect spark plug.

3.Replace spark plug with recommended plug if electrodes are worn or if insulator is cracked or

chipped.

4.Check electrode gap with wire feeler gauge and set gap at 0.030 inches (0.76mm), if necessary.

5.Install spark plug, tighten securely.

NOTE: You can purchase a new spark plug by calling 1-800-366-PART.

Carburetor

If you think your carburetor needs adjusting, see your nearest Sears service center. Engine performance may be affected at altitudes above 3000 feet. For

operation at higher elevations, contact your nearest Sears service center.

Spark Attester Service

Your engine is not factoryzequipped with a spark

attester. In some areas, it is illegal to operate an engine without a spark attester. Check local laws and regulations. A spark attester is available from your nearest Sears service center. If you need to order a spark attester, please call 1-800-366-PART.

The spark attester must be serviced every 50 hours to keep it functioning as designed.

If the engine has been running, the muffler will be very

hot. Allow the muffler to cool before servicing spark attester.

DO NOT touch hot surfaces.

Allow equipment to coo! before touching.

The pressure washer must be at least 5 feet from structures having combustible walls and/or other

combustible materials.

Keep at least 3 feet of clearance on al! sides of pressure

washer for adequate cooling, maintenance and servicing_

In the State of California a spark attester is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. If you equip the muffler with a spark attester, it must be maintained in effective working order.

Remove spark attester screen for cleaning and

inspection.

Replace if screen is damaged.

Air Cooling System

Over time debris may accumulate in cylinder cooling fins and cannot be observed without partial engine

disassembly. For this reason, we recommend you have an authorized Sears service dealer clean the cooling system per recommended intervals (see "Maintenance Schedule" on page 13). Equally important is to keep top of engine free from debris. See "Clean Debris".

CLL,_/

580.75231 specifications

The Craftsman 580.75231 is a versatile and efficient gas-powered pressure washer that is designed to tackle a wide range of cleaning tasks with ease. With its powerful engine and high-pressure capabilities, this equipment is a popular choice among homeowners and professionals alike who need a reliable solution for tough cleaning jobs.

One of the standout features of the Craftsman 580.75231 is its robust engine. Equipped with a 190cc engine, it produces a strong performance that generates a maximum pressure of 2700 PSI. This impressive power allows users to blast away dirt, grime, and stubborn stains from various surfaces, including driveways, decks, patios, and vehicles. The pressure washer also comes with a flow rate of up to 2.3 gallons per minute (GPM), making it efficient for larger cleaning areas.

The Craftsman 580.75231 incorporates a user-friendly design that enhances usability and convenience. It features large all-terrain wheels that allow for easy maneuverability over different surfaces while providing stability during operation. The compact and ergonomic handle offers a comfortable grip, reducing user fatigue during extended cleaning tasks.

Another noteworthy characteristic of the Craftsman 580.75231 is its adjustable spray nozzle. This feature enables users to select from various spray patterns, including a narrow jet for tough spots and a wider spray for rinsing larger areas quickly. The quick-connect nozzle system allows for easy swapping between nozzles, providing versatility in handling different cleaning applications.

Equipped with a detergent injection system, the Craftsman 580.75231 enhances its cleaning effectiveness. This system allows for the application of soap or cleaning solutions to help lift stains and dirt, making it easier to clean surfaces with stubborn build-up. The detergent tank is conveniently integrated into the design, allowing users to switch between detergent and plain water effortlessly.

Safety and durability are also prioritized in the Craftsman 580.75231. It features a sturdy frame and protective casing to withstand wear and tear during use. Additionally, the pressure washer is designed with safety in mind, including a safety lock feature that prevents accidental start-ups.

In summary, the Craftsman 580.75231 is a powerful and efficient solution for all your cleaning needs. With its high pressure, adjustable nozzles, and durable construction, this pressure washer stands out as a reliable choice for tackling challenging tasks and maintaining the cleanliness of various surfaces around the home or job site.

Craftsman 580.75231 owner manual Warn NG

Models: 580.75231