NOTE
This unit is shipped WITHOUT GASOLINE or OIL, After assembly, see operation section of this manual for proper fuel and engine oll recommendations
ASSEMBLY INSTRUCTIONS
Tools Required for Assembly:
121 7/16" Open End or Box Wrenches"
(1)1/2" Socket Wrench
*An Adiustable Wrench may be used in place of one of the wrenches
NOTE
The right and left side of your chipper- shredder is determined from behind the unit,
UNPACKING
Remove the
carton,, Make certain all parts and literature have been removed before the carton is discarded,
Parts in Carton:
Chute Deflector
Hopper
Upper Leaf Ramp Section
Catcher Bag
Hardware Pack
Safety Glasses
Contents of Hardware Pack (See Figure 1):
A (8) Hex Bolts
B (8) Hex Lock Nuts
D (2) Keepers
FIGURE 1,
Chute
Deflector
CHUTE DEFLECTOR INSTALLATION
1, Place the chute deflector in position on the
Hex Bolts (A)
discharge opening (on the left side of the chipper-
Hex Lock
shredder) See figure 2
2 Secure chute deflector to discharge opening with
..,_.Nuts
j-
hex bolts (A) and hex lock nuts IB) Heads of the hex bolts are inside the discharge opening Hex nuts go on the outside
3 Tighten all four nuts and bolts securely
FIGURE 2.