Craftsman 247.796890, 770-5875B manual Handle, 1t2 inch diameter Elastic, Nuts FIGURE, o

Lower the leaf ramp by holding the handle and pulling up on the release bar See figure 12 Leaves and small

twigs can be raked into the chipper-shredderwith the

leaf ramp in this position See figure 13

Leaf Ramp

Handle

\

No larger than

1t2 inch diameter

Elastic

> Lock

Nuts

FIGURE 14.

Bulky material, such as stalks or heavy branches (anything over tt2" diameter), should be fed into the chip-it guide.. See

FIGURE 12.figure 15. Do not force or jam material in- to the chip-it guide Make certain leaf

ramp is raised as shown in figure 15 when using the chip-it guide

Make certain chip-it guide door is closed when not in use

Keep Leaf Ramp Raised

When Using Chip-It Guide

Leaf Ramp ,_(

FIGURE 13o

Small branches can also be fed into the leaf ramp See
figure 14	FIGURE 15,