The completed blower tube should look like Figure 6.
Elbow Tube | ./ Hose Clamp |
Flex Tube
Throttle Cables
Hose Clamp_ _
)o0
On/Off Switch
Upper Blower
_Throttle Grip
First Lower _
Blower Tube _
Second Lower
Blower Tube _
Secure the Throttle Cables
Place a zip tie around the elbow tube and the throttle cables (Fig. 7) as shown, making sure not to crimp the cables.
Zip Tie
i
Zip Tie
Fig. 7
Adjusting the Handle
1.Rotate the throttle grip counterclockwise around the blower tube until it is pointing directly downward (Fig. 8, A).
I _ | adjust. This may cause the throttle cables to | ||||
I WARNING: | Do not rotate | the | handle | clockwise to | |
| disconnect | from the throttle | grip | or the | engine. |
_ B
A
Fig. 8
2.Pull or push the throttle grip along the handle tube until its distance from the backpack blower is comfortable (Fig. 8, B).
3.Align the throttle grip with the slot closest to the comfortable place and rotate the throttle grip clockwise into the upright position (Fig. 9).
Nozzle
| Fig. 6 | I |
|
sure that the blower tubes are locked in place or firmly |
| ||
WARNING: | To avoid serious personal injury, make |
| |
installed. |
| Fig. 9 | |
|
| ||
