|
|
| I |
| I I |
| CUSTOMER |
| RESPONSIBILITIES | ||
MAINTENANCE SCHEDULE |
| ___/_ | ,_ | _/_ | |
FILL IN DATES |
| /_'_/_Q"_//_/._O_J_ |
|
| |
ASYouCOMPL |
|
|
|
| |
REGUBERV,CE |
|
|
| DATES | |
| Check Tire Pressure | _Vp | _Vp |
|
|
| Brake Operati°n |
|
| ||
T | Check for Loose Fasteners | V _ | I_';' | V' |
|
H |
|
|
|
|
|
| Sharpen/Replace Mower Blades |
| =_j4 |
|
|
A | LubricationChart |
|
|
|
|
TCheck Battery Level/Recharge, Clean Battery and Terminals
R | Check Transaxle Cooling | V' |
|
| Adjust Blade Belt(s) Tension | VPs |
|
| Adjust MotionDrive Belt(s) Tension | b/5 |
|
| Check Engine Oil Level | V t V t |
|
| Change Engine Oil | _1,2,3 | V t |
| Clean Air Filter | _2 |
|
NE | Clean Air Screen | 14"2 |
|
G | Inspect Muffler/Spark Arrester | V p |
|
N_ | Replace Oil Filter(If equipped) |
|
|
E i Clean Engine Cooling Fins | V*2 | V' | |
| Replace Spark Plug | _l' | |
| Replace Air Filter Paper Cartridge | V'2 | |
| Replace Fuel Filter |
| V p |
1 | - Change | more often when | operating under a heavy load or in high | ambient temperatures. | 5 | - If equipped with adjustable system. |
2 | - Service | more often when | operating in dirty or dusty conditions. |
| 6 | - Not required if equipped with |
3 | - if equipped with oil filter, change oil every 50 hours. |
| ||||
| 7 | - Tighten front axle pivot bolt to 35 | ||||
4 | - Replace blades more often when mowinG in sandy soil. |
|
| Do not overtighten. | ||
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have
been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain tractor as instructed in this manual.
Some adjustments will need to be made periodically to properly maintain your tractor.
All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.
Once a year you should replace the spark plug, clean or replace air filter, and check blades and belts for wear. A new spark plug and clean air filter assure proper
BEFORE EACH USE
•Check engine oil level.
Check brake operation.
•Check tire pressure.
•Check for loose fasteners.
LUBRICATION | CHART |
@ |
|
@ | • FRONT WHEEL @ |
BEARING ZERK | BEARING ZERK |
| ® |
® |
|
CLUTCH |
|
PIVOT(S) |
|
| ® |
| PIVOTS |
(_) SAE 30 OR 10W30 MOTOR OIL
@GENERAL PURPOSE GREASE
®REFER TO CUSTOMER RESPONSIBILITIES "ENGINE" SECTION
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS LUBRI- CANTS WILL ATTRACT DUST AND DIRT THAT WILL SHORTEN
THE LIFE OF THE
FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY, POW-
15 DERED GRAPHITE TYPE LUBRICANT SPARINGLY.
