HOW TO SET UP YOUR TRACTOR
CONNECT BATTERY
_kCAUTION: Do not short battery termi-
nals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, re- move metal bracelets, wristwatch bands, rings, etc. Positive terminal must be con- nected first to prevent sparking from acci-
dental grounding.
. Remove cardboard packing from seat pan and lift seat pan to raised position.
o Open battery box door and remove pro- tective plastic.
o Remove terminal protective caps and discard.
o If this battery is put into service after month and year indicated on label (label located between terminals) charge bat- tery for minimum of one hour at 6_10
amps.
o First connect RED battery cable to posi- tive (+) terminal with hex bolt, flat wash- er, lock washer and hex nut as shown.
Tighten securely.
o Connect BLACK grounding cable to negative
| Discard Terminal |
| |
_ | Proctective | Caps |
|
| Lock | Washer | WasherFlat |
v I | Hex |
|
|
! | Nut |
| Hex |
Positive | Negative |
(Red) Cable | (Black) Cable |
o Close battery box door. Open battery box door for:
. Inspection forsecure connections (to tighten hardware).
oInspection for corrosion. ° Testing battery.
° Jumping (if required). o Periodic charging.
Seat Pan
Battery
Box Door
INSTALL SEAT
Adjust seat before tightening adjustment knob.
•Remove cardboard packing on seat pan.
•Place seat on seat pan and assemble
shoulder boltoTighten shoulder bolt securely.
o Assemble adjustment knob and flat washer loosely. Do not tighten.
o Lower seat into operating position and sit on seat,
•Slide seat until a comfortable position is reached which allows you to press
clutch/brake pedal all the way down.
o Get off seat without moving its adjusted position.
°Raise seat and tighten adjustment knob securely.
Seat
Seat Pan
Sho_tUlder /
_ Flat Washer
Adjustment Knob