WARM WEATHER STARTING (50° F and

above)

7. When engine starts, move the throttle control to the fast position.

The attachments and ground drive can

now be used. If the engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above.

COLD WEATHER STARTING ( 50 ° F and below)

7.When engine starts, allow engine to run with the throttle control in the choke position until the engine runs roughly, then move throttle control to fast position. This may require an engine warm-up period from several seconds to several minutes, depend- ing on the temperature.

AUTOMATIC TRANSMISSION WARM UP

Before driving the unit in cold weather, the transmission should be warmed up as follows:

1.Be sure the tractor is on level ground.

2.Place the motion control lever in neutral. Release the parking brake and let the clutch/brake slowly return to operating position.

3.Allow one minute for transmission to warm up. This can be done during

the engine warm up period,

The attachments can also be used

dudng the engine warm-up period after the transmission has been warmed up.

NOTE: tf at a high altitude (above 3000 feet) or in cold temperatures (below 32 F) the carburetor fuel mixture may need to be adjusted for best engine performance. See =TO ADJUST CARBURETOR" in the

Service and Adjustments section of this manual.

PURGETRANSMISSION

_,CAUTION: Never engage or disen- gage freewheel lever while the engine is running.

To ensure proper operation and perfor- mance, it is recommended that the transmission be purged before operating tractorfor the first time. This procedure will remove any trapped air inside the

transmissionwhich may have developed during shippingof your tractor.

IMPORTANT: Should your transmission

require removal for service or replacement, it should be purged after reinstallation before operating the tractor.

1.Place tractor safely on level surface with engine off and parking brake set.

2.Disengage transmission by placing freewheel control in freewheeling position (See '1"OTRANSPORT" in this section of manual).

3.Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. With motion control lever in neutral (N) position, slowly disengage clutch/ brake pedal.

4.Move motion control lever to full

forward position and hold for five (5) seconds. Move lever to full reverse position and hold for five (5) seconds.

Repeat this procedure three (3) times.

NOTE: During this procedure there will be no movement of drive wheels. The air is

being removed from hydraulicdrive

system.

5.Move motion control lever to neutral

(N)position. Shut- off engine and set parking brake.

6.Engage transmission by placing freewheel control in driving position (See "TO TRANSPORT" in this section of manual).

7.Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. With motion control lever in neutral (N) position, slowly disengage clutch/ brake pedal.

8.Slowly move motion control lever forward, after the tractor moves

approximately five (5) feet, slowly move motion control lever to reverse position. After the tractor moves approximately five (5) feet return the motion control lever to the neutral (N) position. Repeat this procedure with

the motion control lever three (3) times.

Your tractor is now purged and now ready for normal operation.

16

Page 16
Image 16
Craftsman 917.271742 owner manual Purgetransmission, Attachments can also be used

917.271742 specifications

The Craftsman 917.271742 lawn tractor is a versatile and powerful machine designed for homeowners seeking a reliable solution for lawn maintenance. This model is known for its robust performance, user-friendly features, and innovative technologies that make mowing a breeze.

One of the standout features of the Craftsman 917.271742 is its powerful engine. It is equipped with a 24 HP Briggs & Stratton V-Twin engine that provides significant power and efficiency. This engine ensures that the tractor can handle various terrains, from flat lawns to slightly hilly landscapes, without any struggle. The V-Twin design allows for smoother operation and reduced noise, making mowing less of a chore.

The mower deck of the Craftsman 917.271742 is another notable characteristic. With a cutting width of 54 inches, it allows for efficient mowing of larger areas in a shorter amount of time. The deck is made of heavy-duty steel, ensuring durability and longevity. Additionally, it features a deck wash system, making cleanup after mowing quick and easy. Operators can simply connect a hose to the deck wash port for a hassle-free cleaning experience.

Comfort is also a top priority in the design of the Craftsman 917.271742. The tractor comes with an ergonomic seat that is adjustable and padded, providing the user with comfort during extended mowing sessions. The steering wheel is designed for easy maneuverability, making it simple to navigate around obstacles in the yard.

Another feature that enhances the machine's usability is the hydrostatic transmission. This innovative technology allows for smooth acceleration and deceleration without the need for complicated gear shifting. As a result, operators can focus more on mowing and less on managing the transmission.

For added convenience, the Craftsman 917.271742 includes a variety of attachments and accessories. It can be outfitted with a bagger, mulching kit, or snow plow, making it a versatile tool for year-round use. The lights integrated into the front of the tractor also allow for safe mowing in low-light conditions.

In summary, the Craftsman 917.271742 lawn tractor combines power, comfort, and versatility. With its robust engine, wide mowing deck, hydrostatic transmission, and optional attachments, it offers homeowners an efficient and user-friendly solution for maintaining their lawns effectively. Whether tackling large spaces or navigating tight corners, this tractor is built to deliver optimal performance in various lawn care tasks.