TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT

The motion control lever has been preset at the factory and adjustment should not be necessary.

1.Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

2.Start engine and move motion control lever until tractor does not move forward or backward.

3.Hold motion control lever in that

position and turn engine off.

4.While holding motion control lever in place, loosen the adjustment bolt.

5.Move motion control lever to the neutral (N) (lock gate) position.

6.Tighten adjustment bolt securely. NOTE: If additional clearance is needed

to get to adjustment bolt, move mower deck height to the lowest position. After above adjustment is made, if the

tractor still creeps forward or backward while motion control lever is in neutral

position, follow these steps:

1.Loosen the adjustment bolt.

2.Movethe motion control lever 1/4 to

1/2 inch in the direction it is trying to creep.

3.Tighten adjustment bolt securely.

4.Start engine and test.

5.If tractor still creeps, repeat above steps until satisfied.

Motion Control Lever

Neutral

 

k Gate

TRANSMISSION REMOVAL/REPLACE- MENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and before operating the tractor. See =PURGE TRANSMISSION" in the Operation section of this manual

TO ADJUST STEERING WHEEL ALIGN- MENT

If steering wheel crossbars are not

horizontal (left to right) when wheels are positioned straight forward, remove

steedng wheel and reassemble per

instructions in the Assembly section of this manual,

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are

not adjustable on your tractor. If damage has occurred to affect the front wheel toe-

in or camber, contact a Sears or other qualified service center.

TO REMOVE WHEEL FOR REPAIRS

1.Block up axle securely.

2.Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

3.Repair tire and reassemble.

NOTE: On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

4.Replace washers and snap retaining ring securely in axle groove.

5.Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion,

(Rear Wheel Only)

TO START ENGINE WITH A WEAK BATTERY

_kCAUTION: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the MAINTENANCE

section of this manual).

If "jumper cables" are used for emergency starting, follow this procedure: IMPORTANT: Your tractor is equipped

with a 12 volt negative grounded system. The other vehical must also be a 12 volt

negative grounded system. Do not use your tractor battery to start other vehicles.

25

Page 25
Image 25
Craftsman 917.271742 owner manual Transaxle Motion Control Lever Neutral Adjustment, Transmission REMOVAL/REPLACE- Ment

917.271742 specifications

The Craftsman 917.271742 lawn tractor is a versatile and powerful machine designed for homeowners seeking a reliable solution for lawn maintenance. This model is known for its robust performance, user-friendly features, and innovative technologies that make mowing a breeze.

One of the standout features of the Craftsman 917.271742 is its powerful engine. It is equipped with a 24 HP Briggs & Stratton V-Twin engine that provides significant power and efficiency. This engine ensures that the tractor can handle various terrains, from flat lawns to slightly hilly landscapes, without any struggle. The V-Twin design allows for smoother operation and reduced noise, making mowing less of a chore.

The mower deck of the Craftsman 917.271742 is another notable characteristic. With a cutting width of 54 inches, it allows for efficient mowing of larger areas in a shorter amount of time. The deck is made of heavy-duty steel, ensuring durability and longevity. Additionally, it features a deck wash system, making cleanup after mowing quick and easy. Operators can simply connect a hose to the deck wash port for a hassle-free cleaning experience.

Comfort is also a top priority in the design of the Craftsman 917.271742. The tractor comes with an ergonomic seat that is adjustable and padded, providing the user with comfort during extended mowing sessions. The steering wheel is designed for easy maneuverability, making it simple to navigate around obstacles in the yard.

Another feature that enhances the machine's usability is the hydrostatic transmission. This innovative technology allows for smooth acceleration and deceleration without the need for complicated gear shifting. As a result, operators can focus more on mowing and less on managing the transmission.

For added convenience, the Craftsman 917.271742 includes a variety of attachments and accessories. It can be outfitted with a bagger, mulching kit, or snow plow, making it a versatile tool for year-round use. The lights integrated into the front of the tractor also allow for safe mowing in low-light conditions.

In summary, the Craftsman 917.271742 lawn tractor combines power, comfort, and versatility. With its robust engine, wide mowing deck, hydrostatic transmission, and optional attachments, it offers homeowners an efficient and user-friendly solution for maintaining their lawns effectively. Whether tackling large spaces or navigating tight corners, this tractor is built to deliver optimal performance in various lawn care tasks.