1
2 | BATT. RELEASE |
| Switch |
ATTENTION:
Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.
INFORMATION:
It is impossible to charge the
To AC outlet | Power cord |
EN7
USING THE BATTERY PACK
1 Insert the terminal end 1 of the battery pack into the battery pack mount, then firmly push the end 2 of the battery pack in the direction of the arrow until it locks into place as shown in the illustration.
•If the battery pack is attached in the wrong position, a malfunction may occur.
To Detach The Battery Pack . . .
.... while sliding down BATT. RELEASE, detach it.
Approximate recording time
Battery | LCD monitor on/ | LCD monitor off/ | ||
pack | Viewfinder off | Viewfinder on | ||
|
|
|
|
|
| 1 | 2 | 1 | 2 |
45 min. | 50 min. | 55 min. | 1 hr. | |
|
|
|
|
|
1 hr. | 1 hr. | 1 hr. | 2 hrs. | |
(optional) | 35 min. | 45 min. | 55 min. | 5 min. |
|
|
|
|
|
6 hrs. | 7 hrs. | 8 hrs. | 8 hrs. | |
(optional) | 40 min. |
|
| 30 min. |
|
|
|
|
|
1When using
2 When using
NOTES:
●Recording time is reduced significantly under the following conditions:
•Zoom or
•The LCD monitor is used repeatedly.
•The playback mode is engaged repeatedly.
●Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.
AC Power
Adapter/
Charger
To DC OUT
terminal
DC cord
USING AC POWER
Use the AC Power Adapter/Charger (connect as shown in the illustration).
NOTES:
●The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.
●For other notes, pg. 6.
To battery 
pack mount
