64EN

Rewind Button (2)

Fast-Forward Button (3)

POWER Switch

Lock Button

SNAPSHOT Button

 

Display

TO COPY TO TAPE

PUSH

" SNAPSHOT "

DUBBING (cont.)

Dubbing Images Stored In A

MultiMediaCard To A Tape

Images can be dubbed from a MultiMediaCard to a tape.

1 Load a MultiMediaCard ( pg. 12) and cassette ( pg. 10).

2 Set the POWER Switch to “” while pressing down the Lock Button located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.

3 To locate the point where you wish to dub a still

2

image, play back the tape. Stop playback at the desired point.

4 Set the POWER Switch to “ MEMORY ” while pressing PLAY 3

down the Lock Button located on the switch. To select a still image to be dubbed, perform Index Playback ( pg. 47), Auto Playback ( pg. 45) or press 2or 3 to select the image you wish.

5 To engage Dub-Standby, press SNAPSHOT. The message “TO COPY TO TAPE PUSH "SNAPSHOT"” appears.

6 While the message is being displayed, press SNAPSHOT again. The selected still image is recorded on the tape for approx. 6 seconds.

•The indicator disappears when dubbing is complete.

NOTES:

If SNAPSHOT is pressed in step 5 when the tape’s erase protection tab is set to “SAVE”, the message “COPYING FAILED” is displayed.

The XGA image is dubbed onto the tape at 720 x 480 pixels.

You can superimpose a print frame over the selected still image to be dubbed (  pg. 51) and dub it to a tape. After step 4, superimpose a print frame over the still image and go to step 5.

Page 64
Image 64
JVC GR-DVX9 64EN, Dubbing Images Stored In a MultiMediaCard To a Tape, Indicator disappears when dubbing is complete