![](/images/new-backgrounds/1295712/29571287x1.webp)
44EN | PLAYBACK Advanced Features For Video (cont.) |
START/STOP Button
POWER Switch
Lock Button
Play/Pause Button (4/6)
Stop Button (5)
E-MAIL CLIP REC
Button
Display
E - MA I L CL I P
RECORD I NG
After approx. 20 seconds or when START/STOP is pressed
E - MA I L CL I P
RECORD I NG
Storing is complete
Playback Screen
E - MA I L CL I P
RECORD I NG
COMP L E T ED
E-Mail Clip Recording
You can make video clips from recorded video footage and store them in a MultiMediaCard as files which can be conveniently sent via
1 | Load a MultiMediaCard ( pg. 12) and cassette | |
( pg. 10). Set the POWER Switch to “ | ” while |
pressing down the Lock Button located on the switch.
2 Press 4/6 to start video playback.
3 Press
4 Press START/STOP.
•The camcorder stops
To cancel E-Mail Clip Recording . . .
.... after step 3, press
to stop video playback.
To view video clips stored in a MultiMediaCard . . .
.... the video clip selected in the
( pg. 47, Index Playback) can be viewed in the LCD monitor or viewfinder; video clips cannot be displayed on a connected TV.
NOTES:
●Playback operation cannot be performed during
●If you press START/STOP while
●Also, if the end of the tape is reached during
●If the end of the tape is reached in step 3, the
●Refer to the instruction manual of the provided software, CardNavigator, Video Player and JVC Video Decoder.
●Video noise may appear while viewing video clips in the LCD monitor or viewfinder, however, this noise is not present in the actual video clips stored in the MultiMediaCard.