JVC GR-DVX9 60EN, Dubbing To a VCR, To use this camcorder as a player, For GR-DVX10 owners only

Engage the VCR’s AUX and Record-Pause modes.

60EN

POWER Switch

Lock Button

		To S
Red to	Yellow to
AUDIO R	VIDEO*
White to	Core filter
AUDIO L
Audio/Video cable		S-Video
[RCA plug to RCA		cable
plug] (optional)		(optional)

To AUDIO,

VIDEO*

and -IN connectors

Cable Adapter (provided)

If your VCR has a	“Y/C”/“CVBS”
SCART connector,
	video out
use the provided
	select switch
cable adapter.

VCR

TV

*Connect when an S-Video cable is not used.

DUBBING

Dubbing To A VCR

[To use this camcorder as a player]

1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 56 and 57.

2 Set the camcorder’s POWER Switch to “” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

3 [For GR-DVX10 owners only]

Set “AV/S-VIDEO” to “OUT” in the Menu Screen (
pg. 41).

4

5 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/6 on the camcorder.

6 Press 4/6 on the camcorder and engage the VCR’s Record mode.

7 Engage the VCR’s Record-Pause mode and press 4/6 on the camcorder.

8 Repeat steps 5 through 7 for additional editing, then stop the VCR and camcorder when finished.

NOTES:

●When connecting the cables, make sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.

●You can use the AV OUT connector on the camcorder for connection.

●You can use Playback Zoom (
pg. 68) or Playback Special Effects (
pg. 69) in step 5.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

●Set the video out select switch of the cable adapter as required:

Y/C	: When connecting to a TV or VCR which accepts
	Y/C signals and uses an S-Video cable.
CVBS	: When connecting to a TV or VCR which does not
	accept Y/C signals and uses an audio/video cable.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (
pg. 41).

•Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (
pg. 41).

•Playback Sound Mode, Tape Speed And Tape Running Displays

..... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu Screen (
pg. 41). Or, press DISPLAY on the remote control.