JVC GR-DVX9 specifications EN91

EN91

Warning Indications

Indications				Function
	Displays the battery remaining power.
	Remaining power level: high
	Remaining power level: exhausted
	As the battery power comes close to nil, the battery indicator						blinks.
	When the battery power is exhausted, power turns off automatically.
	Appears when no tape is loaded.					( pg. 10)
CHECK TAPE’S ERASE	Appears when the erase protection tab is set to “SAVE” while the POWER
PROTECTION SWITCH	Switch is set to “			”.		( pg. 10)
	Appears if dirt is detected on the heads during recording. Use an optional
HEAD CLEANING	cleaning cassette.					( pg. 94)
REQUIRED USE
CLEANING CASSETTE
	Appears if condensation occurs. When this indication is displayed, wait
CONDENSATION	more than 1 hour until condensation disappears.
OPERATION PAUSED
PLEASE WAIT
TAPE!	Appears if a tape is not loaded when START/STOP is pressed while the
	POWER Switch is set to “				” and the MODE Dial is set to “VIDEO”,
	“ ” or “	DUAL	”.
TAPE END	Appears when the tape ends during recording or playback.					( pg. 17)
DIFFERENT	Appears if a tape in another format is loaded.
FORMATTED TAPE
SET DATE/TIME!	● Appears when the date/time is not set.					( pg. 9)
	● Appears when the built-in clock (lithium) battery is discharged and the
	previously set date/time is erased.					( pg. 9)
A. DUB ERROR!	Appears if Audio Dubbing is attempted on a blank portion of a tape.
						( pg. 76)
A. DUB ERROR!	● Appears if Audio Dubbing is attempted on a tape recorded in the LP
<CANNOT DUB	mode.					( pg. 76)
ON A LP RECORDED	● Appears if Audio Dubbing is attempted on a tape recorded in 16-bit
TAPE>
	audio.					( pg. 76)
<CANNOT DUB
	● Appears if A. DUB (e) on the remote control is pressed when the erase
ON A 16BIT
	protection tab is set to “SAVE”.					( pg. 76)
RECORDING>
<CHECK TAPE’S ERASE
PROTECTION SWITCH>
MEMORY IS FULL	Appears when the MultiMediaCard’s memory is full and shooting is not
	possible.

CONTINUED ON NEXT PAGE