TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM | CAUSE |
|
|
|
|
| CORRECTION |
|
|
|
| |||||
Loss of power | 6. | Faulty | spark | plug. |
| 6. | Clean | and regap | or | change | ||||||
(continued) |
|
|
|
|
|
|
|
| spark | plug. |
|
|
|
| ||
| 7. | Dirty | fuel | filter. |
|
| 7. | Replace |
| fuel | filter. |
| ||||
| 8. | Stale | or dirty | fuel. |
| 8. | Empty fuel tank and refill tank | |||||||||
| 9. | Water | in | fuel. |
|
|
|
| with fresh, | clean |
| gasoline. | ||||
|
|
|
| 9. | Empty | fuel tank |
| and | carbure- | |||||||
|
|
|
|
|
|
|
|
| tor, refill tank with fresh gas- | |||||||
|
|
|
|
|
|
|
|
| oline and replace fuel filter. | |||||||
| 10. Spark | plug wire | loose. | 10. | Connect |
| and | tighten | spark | |||||||
|
|
|
|
|
|
|
|
| plug wire. |
|
|
|
|
| ||
| 11. | Dirty | engine | air | screen/fins. | 11. | Clean | engine | air | screen/fins. | ||||||
| 12. | Dirty/clogged | muffler. | 12. | Clean/replace |
| muffler. | |||||||||
| 13. | Loose | or | damaged | wiring. | 13. | Check | all | wiring. |
|
| |||||
| 14. | Carburetor | out | of | adjustment. | 14. | See "To | Adjust | Carburetor" | |||||||
|
|
|
|
|
|
|
|
| in Service |
| and | Adjustments | ||||
|
|
|
|
|
|
|
|
| section. |
|
|
|
|
|
|
|
| 15. Engine valves out of | 15. | Contact | a Sears | or other | |||||||||||
|
| adjustment, |
|
|
|
| qualified |
| service | center. |
Excessive | 1. | Worn, | bent | or | loose blade. |
vibration |
|
|
|
|
|
| 2. | Bent | blade | mandrel. | |
| 3. | Loose/damaged | part(s). |
1.Replace blade. Tighten blade bolt.
2.Contact a Sears or other qualified service center.
3.Tighten loose part(s). Replace damaged parts.
Engine | continues | . | Faulty | . | Check | wiring, | switches and | ||
to run when |
| presence control system. |
| connections. | If not | corrected, | |||
operator | leaves |
|
|
| contact | a Sears | or | other | |
seat with |
|
|
| qualified | service | center. | |||
attachment |
|
|
|
|
|
|
|
|
clutch engaged
Poor cut - uneven . Worn, bent or loose blade.
| 2. | Mower | deck | not level. |
| |||
| 3. | Buildup | of grass, | leaves, and | ||||
|
| trash | under | mower. |
| |||
| 4. | Bent | blade | mandrel. |
| |||
| 5. | Clogged | mower | deck | vent | |||
|
| from | ||||||
|
| and trash around | mandrels. | |||||
Mower blades will | 1. | Obstruction |
| in clutch |
| |||
not rotate |
| mechanism. |
|
|
|
| ||
| 2. | Worn/damaged | mower | drive | ||||
|
| belt. |
|
|
|
|
|
|
| 3. | Frozen | idler |
| pulley. |
| ||
| 4. | Frozen | blade | mandrel. |
| |||
Poor grass | 1. | Engine | speed too slow. | |||||
discharge |
|
|
|
|
|
|
|
|
| 2. | Travel speed | too | fast. |
|
1.Replace blade. Tighten blade bolt.
2.Level mower deck.
3.Clean underside of mower housing.
4.Contact a Sears or other qualified service center.
5.Clean around mandrels to open vent holes.
1.Remove obstruction.
2.Replace mower drive belt.
3.Replace idler pulley.
4.Contact a Sears or other qualified service center.
1.Place throttle control in "FAST" position.
2.Shift to slower speed.
29