CLEANING
•Clean engine, battery, seat, finish, etc. of all foreign matter.
•Keep finished surfaces and wheels free of all gasoline, oil, etc.
•Protect painted surfaces with auto- motive type wax.
We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and transmis- sion are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed
air or a leaf blower to remove grass, leaves and trash from tractor and mower.
WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER- VICE OR ADJUSTMENTS:
1.Depress clutch/brake pedal fully and set parking brake.
2.Place motion control lever in neutral (N) position.
3.Place attachment clutch in "DISENGAGED" position.
4.Turn ignition key to "STOP" and remove key.
5.Make sure the blades and all moving parts have completely stopped.
6.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
TRACTOR
TO REMOVE MOWER
1.Place attachment clutch in "DISEN- GAGED" position.
2.If equipped, turn height adjustment knob to lowest setting.
3.Lower mower to its lowest position.
4.Disengage belt tension rod from lock bracket.
J_CAUTION: Rod is spring loaded. Have a tight grip on rod and release slowly.
5.Remove retainer spring holding
6.Remove four retainer springs from front plate assembly and remove plate.
7.Remove retainer springs from suspen-
sion arms at deck and disengage arms from deck.
8.Raise attachment lift to its highest posi- tion.
9.Slide mower forward and remove belt from electric clutch pulley.
10.Slide mower out from under right side of tractor.
TO INSTALL MOWER
Be sure tractor is on level surface and mower suspension arms are raised with
attachment lift control. Engage parking brake.
1.Swing
| Lock Bracket | Front Mower |
|
|
|
Belt Tension | Rod |
|
|
| |
Bracket |
|
|
| ||
(Disengaged | ,,'7 | Electric Clutch | Double | Loop |
|
Position) | " | Pulley | Retainer | Springs |
|
|
|
|
| Front Plate | |
Chassis |
|
|
| Assembly | |
Bracket |
|
|
|
|
|
Retainer |
|
|
| Single | Loop |
S |
|
|
| ||
|
|
| Retainer Springs | ||
|
|
|
| ||
|
|
|
| Flanged | Pins |
Bar
USE PLIERS FOR
RETAINER SPRINGS
Front Mower
Bracket
Suspension
Arms Double Loop Retainer Springs
(Outward pointingDeflector Shield deck pins)
19