Craftsman 917.273763 owner manual Belt Installation, To Check and Adjust Brake, To Check Brake

Models: 917.273763

1 56
Download 56 pages 14.99 Kb
Page 25
Image 25

BELT INSTALLATION -

1.Work belt around both mandrel pulleys and idler pulleys

2.Make sure belt is in all pulley grooves and inside all belt guides.

3.Install mower (See "To Install Mower" in this section of this manual).

Mandrel

Pulley

TO CHECK AND ADJUST BRAKE

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

1.Park tractor on a level, dry concrete or

paved surface, depress clutch/brake pedal all the way down and engage

parking brake.

2.Disengage transmission by placing freewheel control in "transmission dis-

engaged" position. Pull freewheel con- trol out and into the slot and release so

it is held in the disengaged position. The rear wheels must lock and skid when

you try to manually push the tractor for- ward. If the rear wheels rotate, the brake

needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

1.Depress clutch/brake pedal all the way down and engage parking brake.

2.Measure distance between brake oper- ating arm and nut "A" on brake rod.

3.If distance is other than 1-9/16", loosen jam nut and turn nut "A" until distance becomes 1-9/16". Retighten jam nut against nut "A".

4.Engage transmission by placing freewheel control in "transmission

engaged'position.

. Road test tractor for proper stopping

distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest

gear, further maintenance is neces- sary. Replace brake pads or contact a

Sears or other qualified service center.

With parking brake "Engaged"

Nut

Arm

Do not touch this nut. If further brake adjustment is necessary contact a Sears or other qualified service center.

TO REPLACE MOTION DRIVE BELT

Park the tractor on level surface. Engage parking brake. For assistance, there is a

belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

1. Remove mower (See "TO REMOVE

MOWER" in this section of manual). NOTE: Observe entire motion drive belt

and position of all belt guides and keepers.

2.Remove belt from stationary idler and clutching idler.

3.Remove belt downward from around engine pulley.

4.Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades.

5.Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

1.Carefully work new belt down around transmission cooling fan and onto the

input pulley.

2.Slide belt into the center span keeper.

3.Pull belt toward front of tractor and roll around the top groove of engine pulley.

4.Install belt through stationary idler and clutching idler.

5.Make sure belt is in all pulley grooves and inside all belt guides and keepers.

6.Install mower (See "TO INSTALL MOWER" in this section of manual).

25

Page 25
Image 25
Craftsman 917.273763 owner manual Belt Installation, To Check and Adjust Brake, To Check Brake, To Adjust Brake

917.273763 specifications

The Craftsman 917.273763 is a powerful and versatile lawn mower designed to meet the needs of residential users seeking reliability and performance. This machine stands out in the crowded market of lawn care equipment due to its robust features, advanced technology, and user-friendly design.

One of the primary characteristics of the Craftsman 917.273763 is its efficient 25-horsepower engine. This powerful engine ensures that the mower can easily handle thick grass and challenging terrain, providing a clean and even cut every time. The mower's cutting deck measures 54 inches, which strikes a balance between maneuverability and efficiency. This size allows users to cover larger areas in less time, making it an excellent choice for homeowners with expansive lawns.

The cutting height is adjustable, enabling users to select from multiple cutting positions based on their lawn's needs. This flexibility not only promotes healthier grass growth but also accommodates different landscaping styles. The mower is equipped with a dual-blade system, which enhances grass cutting performance and helps to produce fine clippings that can be left on the lawn as natural mulch.

One of the standout technologies in the Craftsman 917.273763 is its electronic ignition system, which provides reliable starting performance every time. This innovation eliminates the guesswork often associated with traditional ignition systems and enhances overall ease of use. Additionally, the mower comes with a hydrostatic transmission, which offers smooth and effortless speed adjustments. Users can shift seamlessly from forward to reverse, a feature that greatly enhances maneuverability, especially in tight spaces.

Comfort is another key aspect of this mower's design. The operator's seat is cushioned and adjustable, allowing users to find their preferred position for prolonged mowing sessions. The steering wheel is ergonomically designed, and controls are within easy reach, making it user-friendly for individuals of all ages.

Safety features are also integral to the Craftsman 917.273763. It includes blade brake technology, ensuring that the mower's blades stop within seconds of releasing the drive lever. This feature significantly reduces the risk of accidents.

In summary, the Craftsman 917.273763 stands out due to its powerful engine, adjustable cutting capabilities, comfortable design, and advanced technologies. Whether managing a small yard or a larger property, this mower delivers the performance and reliability homeowners need for maintaining a pristine lawn.