Craftsman 917.273763 owner manual Transaxle Motion Control LE- VER Neutral Adjustment

Models: 917.273763

1 56
Download 56 pages 14.99 Kb
Page 26
Image 26

Engine Pulley_

Clutching Idler

Stationary

Center Span

Keeper

Transmission

Input Pulley

TRANSAXLE MOTION CONTROL LE- VER NEUTRAL ADJUSTMENT

The motion control lever has been preset at the factory and adjustment should not be necessary.

1.Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

2.Start engine and move motion con- trol lever until tractor does not move forward or backward.

3.Hold motion control lever in that posi- tion and turn engine off.

4.While holding motion control lever in place, loosen the adjustment bolt.

5.Move motion control lever to the neutral

(N)(lock gate) position.

6.Tighten adjustment bolt securely. NOTE: If additional clearance is needed

to get to adjustment bolt, move mower deck height to the lowest position.

After above adjustment is made, if the

tractor still creeps forward or backward while motion control lever is in neutral

position, follow these steps:

1.Loosen the adjustment bolt.

2.Move the motion control lever 1/4 to 1/2 inch in the direction it is trying to creep.

3.Tighten adjustment bolt securely.

4.Start engine and test.

5.If tractor still creeps, repeat above steps until satisfied.

Motion Control

Lock

Gate

Adjustment

Bolt

TRANSMISSION REMOVAL/

REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged

after reinstallation and before operating the tractor. See "PURGE TRANSMISSION" in

the Operation section of this manual.

TO ADJUST STEERING WHEEL ALIGN-

MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble with crossbars horizontal. Tighten securely.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not

adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or

camber, contact a Sears or other qualified service center.

TO REMOVE WHEEL FOR REPAIRS

1.Block up axle securely.

2.Remove axle cover, retaining ring and washers to allow wheel removal (rear

wheels have a square key - Do not lose).

3.Repair tire and reassemble.

NOTE: On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

4.Replace washers and snap retaining ring securely in axle groove.

5.Replace axle cover.

NOTE: To seal tire punctures and prevent

flat tires due to slow leaks, purchase and use tire sealant from Sears. Tire sealant

also prevents tire dry rot and corrosion.

Washers

Retaining Ring

Axle Cover

Square Key

........._ '

(Rear Wheel

Only)

TO START ENGINE WITH A WEAK BAT- TERY

_WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from bat- teries. Always wear eye protection when around batteries.

If your battery is too weak to start the

engine, it should be recharged. (See "BAT- TERY" in the MAINTENANCE section of

this manual).

26

Page 26
Image 26
Craftsman 917.273763 owner manual Transaxle Motion Control LE- VER Neutral Adjustment, Transmission Removal Replacement

917.273763 specifications

The Craftsman 917.273763 is a powerful and versatile lawn mower designed to meet the needs of residential users seeking reliability and performance. This machine stands out in the crowded market of lawn care equipment due to its robust features, advanced technology, and user-friendly design.

One of the primary characteristics of the Craftsman 917.273763 is its efficient 25-horsepower engine. This powerful engine ensures that the mower can easily handle thick grass and challenging terrain, providing a clean and even cut every time. The mower's cutting deck measures 54 inches, which strikes a balance between maneuverability and efficiency. This size allows users to cover larger areas in less time, making it an excellent choice for homeowners with expansive lawns.

The cutting height is adjustable, enabling users to select from multiple cutting positions based on their lawn's needs. This flexibility not only promotes healthier grass growth but also accommodates different landscaping styles. The mower is equipped with a dual-blade system, which enhances grass cutting performance and helps to produce fine clippings that can be left on the lawn as natural mulch.

One of the standout technologies in the Craftsman 917.273763 is its electronic ignition system, which provides reliable starting performance every time. This innovation eliminates the guesswork often associated with traditional ignition systems and enhances overall ease of use. Additionally, the mower comes with a hydrostatic transmission, which offers smooth and effortless speed adjustments. Users can shift seamlessly from forward to reverse, a feature that greatly enhances maneuverability, especially in tight spaces.

Comfort is another key aspect of this mower's design. The operator's seat is cushioned and adjustable, allowing users to find their preferred position for prolonged mowing sessions. The steering wheel is ergonomically designed, and controls are within easy reach, making it user-friendly for individuals of all ages.

Safety features are also integral to the Craftsman 917.273763. It includes blade brake technology, ensuring that the mower's blades stop within seconds of releasing the drive lever. This feature significantly reduces the risk of accidents.

In summary, the Craftsman 917.273763 stands out due to its powerful engine, adjustable cutting capabilities, comfortable design, and advanced technologies. Whether managing a small yard or a larger property, this mower delivers the performance and reliability homeowners need for maintaining a pristine lawn.