Craftsman 917.273763 owner manual Replacing Battery, Interlocks and Relays, To Replace Fuse

Models: 917.273763

1 56
Download 56 pages 14.99 Kb
Page 27
Image 27

If "jumpercables"are usedfor emergency starting,followthis procedure: IMPORTANT:Yourtractor is equipped with a 12 volt system.The other vehicle mustalso be a 12 volt system.Do not use your tractor batteryto start othervehicles.

TO ATTACHJUMPER CABLES-

1.Connectone end of the RED cable

to the POSITIVE(+) terminalof each battery(A-B),taking care notto short againsttractor chassis.

2.Connectone end of the BLACKcable

to the NEGATIVE(-) terminal (C)of fully chargedbattery.

3.Connectthe other end of the BLACK

cable (D)to good chassisground, awayfrom fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

1.BLACK cable first from chassis and then from the fully charged battery.

2.RED cable last from both batteries.

Weak or Dead Battery Fully Charged Battery

REPLACING BATTERY

_,WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands,

rings, etc.

Positive terminal must be connected first to prevent sparking from accidental grounding.

1.Lift seat pan to raised position.

2.Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

3.Install new battery with terminals in same position as old battery.

4.First connect RED battery cable to positive (+) terminal with hex bolt and

keps nut as shown. Tighten securely. Slide terminal cover over terminal

5.Connect BLACK grounding cable to negative (-) terminal with remaining hex bolt and keps nut. Tighten securely.

Terminal

Keps

NuHex

Bolt

Positive (Red) Cable Negative (Black) Cable

TO REPLACE HEADLIGHT BULB

1.Raise hood.

2.Pull bulb holder out of the hole in the backside of the grill.

3.Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

4.Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause

your tractor to run poorly, stop running, or prevent it from starting.

• Check wiring. See electrical wiring diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type

plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL AS- SEMBLY

1.Raise hood.

2.Unsnap headlight wire connector.

3.Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

4.When replacing hood, be sure to re- connect the headlight wire connector.

Hood

adlight Wire

nnector

27

Page 27
Image 27
Craftsman 917.273763 Replacing Battery, Interlocks and Relays, To Replace Fuse, To Remove Hood and Grill AS- Sembly

917.273763 specifications

The Craftsman 917.273763 is a powerful and versatile lawn mower designed to meet the needs of residential users seeking reliability and performance. This machine stands out in the crowded market of lawn care equipment due to its robust features, advanced technology, and user-friendly design.

One of the primary characteristics of the Craftsman 917.273763 is its efficient 25-horsepower engine. This powerful engine ensures that the mower can easily handle thick grass and challenging terrain, providing a clean and even cut every time. The mower's cutting deck measures 54 inches, which strikes a balance between maneuverability and efficiency. This size allows users to cover larger areas in less time, making it an excellent choice for homeowners with expansive lawns.

The cutting height is adjustable, enabling users to select from multiple cutting positions based on their lawn's needs. This flexibility not only promotes healthier grass growth but also accommodates different landscaping styles. The mower is equipped with a dual-blade system, which enhances grass cutting performance and helps to produce fine clippings that can be left on the lawn as natural mulch.

One of the standout technologies in the Craftsman 917.273763 is its electronic ignition system, which provides reliable starting performance every time. This innovation eliminates the guesswork often associated with traditional ignition systems and enhances overall ease of use. Additionally, the mower comes with a hydrostatic transmission, which offers smooth and effortless speed adjustments. Users can shift seamlessly from forward to reverse, a feature that greatly enhances maneuverability, especially in tight spaces.

Comfort is another key aspect of this mower's design. The operator's seat is cushioned and adjustable, allowing users to find their preferred position for prolonged mowing sessions. The steering wheel is ergonomically designed, and controls are within easy reach, making it user-friendly for individuals of all ages.

Safety features are also integral to the Craftsman 917.273763. It includes blade brake technology, ensuring that the mower's blades stop within seconds of releasing the drive lever. This feature significantly reduces the risk of accidents.

In summary, the Craftsman 917.273763 stands out due to its powerful engine, adjustable cutting capabilities, comfortable design, and advanced technologies. Whether managing a small yard or a larger property, this mower delivers the performance and reliability homeowners need for maintaining a pristine lawn.