CHECK TIRE PRESSURE
The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best
cutting performance.
•Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" section of this manual.
CHECK MOWER LEVELNESS
For best cutting results, mower should be
propedy leveled. See "TO LEVEL
MOWER HOUSING" in the Service and
Adjustments section of this manual.
CHECK FOR PROPER POSITION OF ALL BELTS
See the figures that are shown for replacing motion, mower drive, and mower blade drive belts in the Service
and Adjustments section of this manual. Verify that the belts are routed correctly.
v"CHECKLIST
Before you operate and enjoy your new tractor, we wish to assure that you receive the best performance and satisfaction
from this Quality Product.
Please review the following checklist:
`/All assembly instructions have been completed.
`/No remaining loose parts in carton. `/Battery is properly prepared and
charged. (Minimum 1 hour at 6 amps). ,/" Seat is adjusted comfortably and
tightened securely.
,/,All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).
`/Be sure mower deck is properly leveled
for leveling).
,/Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.
,/Check wiring. See that all connections are still secure and wires are properly clamped.
,/Before driving tractor, be sure free- wheel control is in drive position.
While learning how to use your tractor, pay extra attention to the following important items:
,/ Engine oil is at proper level. ,/Fuel tank is filled with fresh, clean,
regular unleaded gasoline.
`/Become familiar with all controls - their location and function. Operate them before you start the engine.
,/Be sure brake system is in safe operating condition.
,/It is important to purge the transmission before operating your tractor for the first time. Follow proper starting and transmission purging instructions (See "TO START ENGINE" and "PURGE
TRANSMISSION" in the Operation section of this manual).
12
