Craftsman 917.275283 owner manual Recheck idle speed. Readjust if neces- sary

3.Idle fuel needle setting - With throttle control lever in slow position, turn idle fuel adjusting needle in (clockwise) until engine speed decreases and then turn out (counterclockwise) approxi- mately 3/4 turn to obtain the best low speed performance.

4.Recheck idle speed. Readjust if neces- sary.

ACCELERATION TEST -

5.Move throttle control lever from slow to fast position. If engine hesitates or dies, turn idle fuel adjusting needle out (counterclockwise) 1/8 turn. Repeat test and continue to adjust, if neces-

sary, until engine accelerates smoothly. High speed stop is factory adjusted. Do not adjust-damage may result. IMPORTANT: Never tamper with the engine governor, which is factory set

for proper engine speed. Overspeeding the engine above the factory high speed setting can be dangerous. If you think the engine-governed high speed needs ad- justing, contact a Sears or other qualified service center, which has proper equip- ment and experience to make any neces- sary adjustments.

28