Konica Minolta bizhub 40p Error Messages Operator Call, Status, Error, and Service Messages 185

Error Messages (Operator Call:			)
	This message...	means...		do this...
	CHECK LEVER	The face up lever is		Pull the face up lever
	FACE UP TRAY	raised when duplex		down.
	IS SELECTED	printing or sub tray
		output is specified.
	COVER OPEN	The duplex cover is		Close the duplex cover.
	DUPLEX COVER	open.
	COVER OPEN	The offset tray cover		Close the offset tray
	FINISHER COVER	is open.		cover.
	COVER OPEN	The printer's rear		Close the rear cover.
	REAR COVER	cover is open.
	COVER OPEN	The printer's top		Close the top cover.
	TOP COVER	cover is open.
	HOLD JOB ERROR	The specified print job		Print jobs can be saved
	UNABLE TO	saved on the hard		only if a hard disk is
	STORE JOB	disk is sent while the		installed. If desired,
		hard disk is not		install a hard disk.
		installed.
	HOLD JOB ERROR	When printing a		Change the printer con-
	“OPTIONAL”	stored job, the printer		figuration to that when
	PRESS CANCEL	configuration was		the job was stored.
		changed since the job
		was stored.
	INCORRECT TRAY	The installed option		Turn off the power of the
		tray is an unap-		printer, and then remove
		proved type.		the tray.
	MEMORY FULL	The printer has		Press the Cancel key to
	PRESS CANCEL	received more data		cancel the print job.
		than can be pro-		Decrease the amount of
		cessed with its inter-		data to be printed (for
		nal memory.		example, by decreasing
				the resolution), and then
				try printing again.
				If that doesn’t solve the
				problem, install an
				optional memory mod-
				ule.

Status, Error, and Service Messages 185