Konica Minolta bizhub 40p manual 194, Placed

5 Remove the panel.

6	Insert the DIMM at an angle
	(about 45°) into the connector,
	making sure that the notch on
	the unit aligns with the tab on
	connector, and then press down
	carefully until it clicks into place.
	" Be sure to handle the
	DIMM by the edges only.
	" You will hear a click when
	the DIMM is properly
7	placed.
	Reinstall the panel and tighten
8	the two screws.
	Attach the right side cover.
9	Reconnect all interface cables.
10	Reconnect the power cord, and

turn on the printer.

194 Dual In-Line Memory Module (DIMM)