Konica Minolta bizhub 40p manual 174

Symptom	Cause	Solution
You are	Media or settings are	For autoduplexing, make sure that you
experienc-	not correct.	have a duplex option installed.
ing duplex
		Make sure that you are using correct
(double-
		media.
sided) prob-
		„ See “Media Specifications” on page
lems.
		84.
		„ Do not duplex (double-sided) enve-
		lopes, labels, postcards, thick paper
		3, or transparencies.
		„ Make sure that you have not mixed
		media types in a paper tray.
		Make sure that your document has
		more than one page.
		Make sure the duplex option is installed
		and declared in the Windows printer
		driver (Properties/Configure tab).
		In the Windows printer driver (Layout/
		Double-Sided), choose “Dou-
		ble-Sided.”
		For N-up on duplexed pages, choose
		Collate only in the Windows driver’s
		Paper Tab. Do not set collation in the
		application.
With N-up on	Both the driver and	For N-up on multiple copies, choose
multiple cop-	the application have	Collate only in the Windows driver’s
ies, the out-	been set for collation.	Paper Tab. Do not set collation in the
put is		application.
incorrect.
You hear	The printer is not	Place the printer on a flat, hard, level
unusual	level.	surface.
noises.
	The tray is not	Remove the tray that you are printing
	installed correctly.	from and reinsert it completely into the
		printer.
	There is a foreign	Turn off the printer and remove the
	object stuck inside	object. If you cannot remove it, contact
	the printer.	Technical Support.

174 Solving Other Problems